• In order to keep your account secure you should probably enable two-step authentication via email or an app. Go Here

Search results

  1. E

    M100/M90 springs

    I did see it was an old topic but was not sure if this was still an outstanding issue
  2. E

    M100/M90 springs

    Its a hard question to answer lots depends also ont he compression in the hear box itself, I have a KWA SR10 I ahve been changing springs for ages looking for the best FPS get me near 350FPS Its been driving me insane the best spring I have used so far is the Systema M100 (though the last time...
  3. E

    Battery Advice - KWA SR10 Crane Stock

    Devastator does that only apply to Lio packs what I was to get a 9.6V 2400MAH MiMH battery
  4. E

    Battery Advice - KWA SR10 Crane Stock

    Hi Guys I'm slightly confused on the dicharge rate settings on battery packs available for my SR10 I have ordered a battery a 74.v 3000mah 15c Lipo though I had asked a question on the KWA Forums and had the below as a response So that means I cant use any Lipo battery with a high MAH as...
  5. E

    KWA SR10 - Spring Change

    I thought I was doing so well got to the final part Getting the gear box out then came across the smallest hex nut I have ever seen in the mag release So had to put it all together again - I might have one more try tomorrow when I buy more allen keys
  6. E

    KWA SR10 - Spring Change

    Matt Thanks for the reply I have had it in bits today but the last hex screw I needed to remove was a problem as I did not have an allen key to fit it, its the hx nut that is in the mag release very small - anyway gun is back together though did not manage to change the spring - What shop would...
  7. E

    KWA SR10 - Spring Change

    Hi guys I have KWA SR10 and its to hot for Uk sites as it shoots at 400FPS - I have bought a Systema M100 Spring so I can lower the FPS to around 350 or maybe slightly less How difficult a job is this for a neewb am I better taking it to a shop and getting them to do it and if so which shop so...
  8. E

    GT Power/iCharger -- 6S or 8C - Advice Required

    Devastator thanks for the posts mate I really need a charger that can run from a 12 Volt source so if I'm at an airsoft meet over the weekend I can still have the ability to charge my Lipo's in the field Just need to decide which one of teh above chargers to buy
  9. E

    GT Power/iCharger -- 6S or 8C - Advice Required

    You will never use 6s or 8s in airsoft, that's 22.2v and 29.6v respectively. I thought that 6S or 8S was the number of lipo battery in a pack ie 6 or 8 batterys
  10. E

    GT Power/iCharger -- 6S or 8C - Advice Required

    Thanks for the reply, That does help I will forget the GT chrager then Ok so now I just need advice on which of these two chargers to purchase http://www.landwarriorairsoft.com/acatalog/Chargers.html or I really do like the icharger...
  11. E

    GT Power/iCharger -- 6S or 8C - Advice Required

    Hi guys New to airsoft and trying to spec out the equipment I will need, currently joined a club and will have my ukara shorlty Will be buying either a KWA M4 or G & P M4 not sure yet I'm looking to purchase a charger for lipo battery packs, must be reliable I am currently looking at 2...
Back
Top