Chopper92

Chopper92

Members 33 From Norfolk
Joined
Last seen
Messages
233
Feedback score
+0 /0 /-0
Reaction score
21
Points
0

Profile posts Latest activity Postings About Post areas

  • Chopper92
    anyone bought fromm ehobbyasia before?

    Airsoft_Mr B
    Airsoft_Mr B
    Yeah loads

    shortman
    shortman
    Yep, not bad delivery times, did get hit by uk tax mind from customs so bear that in mind when comparing prices. Great service though.

    Chopper92
    new gearbox built and working beautifully!! now just feeding issues :( installed a 5KU one and its shite.

    View previous comments…
    A
    AK47frizzle
    it advertises as no more bb spills but that's a lie, 1 or 2 still drop but significantly less than less than normal drops (5-6)

    Chopper92
    Chopper92
    the hop up needs to be for a umarex ump, so the hop up is a bit of a bugger, similar to the g36

    S
    Sitting Duck
    your nozzle or tappet plate may be a bit long.....

    try placing some electricians tape at front of gearbox to effectively push hop away and allow nozzle to clear thus allowing bb's to enter hop. keep eye on fps as you may lose a little seal if you go too mad

    Chopper92
    Got a week off coming up with a couple of days to spare, anyone know of any sites that run during the week? i know its a long shot as not really commercially viable...but..

    Lozart
    Lozart
    Ironsight in Andover do evening games on a Wednesday and the Malls do evening games on a Thursday. Check their respective FB pages for more info and dates.

    ak2m4
    ak2m4
    Jungle Warfare in Ashford run a CQB evening on Wednesdays. Maybe a fit far for you though.

    Chopper92
    Anyone attempted to put back together a Umarex gearbox?? Single most frustrating experience of my life. WHY DO THEY MAKE THE TRIGGER MECHANISM SO BLOODY FIDDLY

    View previous comments…
    Chopper92
    Chopper92
    my G&G one was a walk in the park compared to this! Finally got it back together and it keeps locking up. Took it apart and cant find any problems. Thinking it my be the battery not delivering enough power

    S
    Sitting Duck
    you might wanna start a post in electric guns or something explaining what you have done installed etc....

    heavier spring, spring guide, blah blah blah

    Chopper92
    Chopper92
    good idea

    Chopper92
    High cycle motor, gearbox to cope and new tightbore all going in, should be fun

    Chopper92
    Time to fully upgrade all the internals on my UMP then. Seeing as i dont use it that much anymore its going to be my little project

    Chopper92
    best ported canister for a 363mm tight bore barrell anyone?

    Chopper92
    Considering attending a mil-sim event this weekend, just cautious about it being full of over-enthusiastic wannabes. Anyone had experience of mil-sim?

    Colonel Kurtz
    Colonel Kurtz
    I had a worse-case scenario and lots of douche-bags on my team, and i didn't really enjoy the scenario. These are clearly a minority and I was just unlucky. Prob same mix as a normal skirmish but you're kinda forced to work together more. People take it more seriously, so there's more potential for people to argue etc. But there's also more potential for very enjoyable good teamwork. All milsims seem to be well organised/composed so if the game style/rules etc sounds appealing...

    Colonel Kurtz
    Colonel Kurtz
    ...then just go for it! won't know til you try :)

    Chopper92
    After an unwanted flecktarh poncho if anyone would oblige? Getting bored of not playing due to work commitments so buying gear has taken its place ahaha

    Chopper92
    After any 7.4/8.4v NimH 'numchuk' style batteries if anyone has got some unwanted ones ? also a spare p-mag? cheers

    View previous comments…
    S
    Sitting Duck
    Little tricky to fit but goes in raiders etc with crane stock OK

    Might have some usual twin stick ones around going cheap as gone lipo which you should consider perhaps

    Chopper92
    Chopper92
    How much better are the Lipos?

    S
    Sitting Duck
    stock guns a little bit better perhaps but you are limited to volts 7.4 or jumping up to 11.1v

    Life or LiFePo are in middle at 9.9v

    But if/when you tweak a gun with more beefy motors you gotta go lipo coz old skool nimah or nicad's just don't have the grunt to cut it

    Chopper92
    anyone know where i can get some digital woodland/marpat M4 mag pouches??

    Airsoft_Mr B
    Airsoft_Mr B
    There aren't any real deal companies making any to my knowledge if you don't mind the dodgy non-genuine MARPAT pattern then TaiwanGun sells some. I'd imagine a few HK retailers will stock something similar as well. More likely to find AOR2 stuff as well

    Chopper92
    Decided! Wanting to get a GC16 FFR 12" next !

    View previous comments…
    Chopper92
    Chopper92
    S
    Sitting Duck
    Aahhhh you didn't say the SD very which appears to have silencer

    I thought you meant the £150 GC16 30th had silencer.

    To me it looks like the BOT 300 (polymer £170 gun)

    And be careful coz looks like battery type might be special on SD aeg

    S
    Sitting Duck
    Skip that no special battery its just ZOBAT8C2 is what they call twin stick nunchuk thingamajig

    Chopper92
    GC16 FFR, APS SPR or Masada ACR?? i really cannot decide. Might have to sell something before i fund one of these though

  • Loading…
  • Loading…
  • Loading…
  • Loading…
Back
Top