-
Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.
The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here
If you have any issues please post about them in the Forum Feedback thread: Go Here
Recent content by Argyld
-
A
THE TM MWS thread
slight adjustments: install NPAS More FPS: tighter or longer barrel less FPS. less powerful gas, shorter barrel -
A
What BB weight is best for TM M4 MWS stock?
I think the heaviest for a stock MWS was 0.28, maybe 0.30 Heavier and you need a to change the hop-up rubber. -
A
TM M4 MWS not shooting straight?
Do they fly to right in a straight line, or do they curve to the right. Basically you aim at point and they consistently impact at the same point but to the right, adjust sights. I can never remember but I think when you hit right, you adjust to the left. If they curve/turn midflight then the... -
A
THE TM MWS thread
A high power valve will increase your FPS, but also your gas efficiency (less shots from the mag). I would take a tighter/longer barrel. You get more FPS, but still have the same gas efficiency. Also if get new mags, no need to change the valves on those to get them to the same level as the... -
A
THE TM MWS thread
Short answer: nothing Slightly more detailed: Check your FPS with a chrony and be aware that GBBRs FPS vary with outside temperature. The hotter, the more FPS. In Winter (<10°C you might want to switch to Red gas) Your nozzle return spring might break after a few thousand shots. General... -
A
THE TM MWS thread
This might justify paying a mini plumber pipe cutter, you know ? Remember to thoroughly clean the tube afterwards, don't want any particles getting blown through your nozzle/barrel. -
A
THE TM MWS thread
Not the best idea. The oring blocks a small hole which vents air from the mag. If there is air in the mag, it can escape via this hole, making place for gas. When gas spews out of this hole, it means your mag is full. If you block this hole with an oring, air cannot escape, reducing gas... -
A
THE TM MWS thread
The fill valve is installed at a slight angle, when the bottom of the mag is straight, the valve is not. Tilt the mag slightly, till the valve is upright (have a closer look at the fill valve, you will see), then you can get some more gas in. But I don't think that will solve your problem... -
A
THE TM MWS thread
Why? I carry enough mags (6) during a game so that you not have to refill BBs. I don't play milsim types of game. Games might take 1-2 hours. Running around with a rattling speed-loader isn't fun. To get to your actual question, cut the tube, do not remove it. Cut it in such a way that it is... -
A
new MWS upper required
Try to switch the bolt with your friend (the rest of the upper stays): Does your bolt work in his MWS? Does his bolt work in your MWS? Narrowing down the error ... Or do you really mean the upper outer body (the upper hull), as the z-parts is just that: an empty hull. But I don't see how... -
A
THE TM MWS thread
Mine is stiff, but no so stiff that you can't adjust click per click. If I remember correctly, usually when the adjustment was too stiff, then usually something was done wrong during re-assembly. I access the through the magwell, my fingers are just long enough :) -
A
Temperature and useability
This and: Be aware, that your FPS will also increase during the day when you go from 10°C to 20°C. Might have to switch to green gas later in the day or install NPAS (and adjust accordingly) -
A
TM breacher shotgun help - corrected to M3 super 90
The missing cap has no function except to cover the hole. In real steel, that's the magazine tube holding the shells, here it is an empty tube. Shells should be easy to find. Shells function as a magazine here. Check if the gas tank is not leaking, should be in the grip.- Argyld
- Post #4
- Forum: Single Action Guns
-
A
1911 mag compatability
KJW are TM clones, so TM fit in KJW. KJW fit in TM but due to tolerances is a tight fit and might have trouble removing the mag. WE has its own design, not TM compatible. Other brands I can't tell. NOT 100% sure, but 95% sure on this: ASG uses KJW as a base, so TM clone Armourer Works uses... -
A
THE TM MWS thread
Project definitely on hold. Managed to control my clickeritis (clicking on anything "add to basket" which I like) and just the bare minimum I noticed it would be much cheaper buying a new MWS than just building a new upper. I keep you updated when clickeritis has kicked in again.
