hi or mid cap?

[paulcotton]

I'm new to the hobby/sport after a long break from when I was a teen with a spring powered desert eagle things have certainly evolved.....

Briefly I'm going to be running a dboys m4 to start with which comes with the 300 rd hi cap mag, I'm looking to get 3 more mags and was wondering am I ok with 3 spare hi caps or would it be best to go for mid caps? Thanks

 

[Lozart]

Personally I'd say it depends on your play style. Unless you're going to seriously spray and pray then I'd say get a few mids and keep the hicap as a backup.

Welcome back by the way

 

[paulcotton]

Cheers for that, the other half told.me I need to get a hobby

 

[Lozart]

Cheers for that, the other half told.me I need to get a hobby

Does she know what she's let herself in for?

Don't forget you'll need a decent speedloader for the midcaps (get the Tokyo Marui M4 mag shaped one, all the others I've ever had have been shite).

 

[paulcotton]

Excuse my stupid question but I guess the sppeloaders needed for the hi cap too?

 

[Baz JJ]

Hi-caps = easy to load +, need winding -ve, carry more bbs, rattle when you move -ve

Mid caps = need some firm of speed loader -ve, silent +ve, give you more realistic mag changes if partially loaded

Mid caps can leave you at a disadvantage when skirmishing as you are changing mags far more often than a high capper but in a milsim, most games prohibit high caps.

The choice is yours.

 

[GunmanAirsoft]

If you're playing skirmish games on a casual basis then you'll probably want to stick to hi caps.

Our Filmsim/milsim lite games have an ammo limit of 600 rounds loaded in mags so if you came to one of them you would be able to use two hi caps.

I switched over to mid caps mainly because I hated the rattle of hi caps and when I do play skirmish I'm usually long dead before I run out of mags due to my habit of charging in headfirst when I have unlimited lives

 

[Lozart]

Excuse my stupid question but I guess the sppeloaders needed for the hi cap too?

No, the hi cap has a little flap on the top, you open that and just pour the BBs in.

 

[Sitting Duck]

yeah basically - both is the answer

mid caps also feed better at silly speeds though capacity means you can't spray and pray too much

hi-caps - 1 mag lasts ya ages if you are travelling very light - like gun only - no pouches n not carrying the kitchen sink etc....

 

[paulcotton]

yeah basically - both is the answer

mid caps also feed better at silly speeds though capacity means you can't spray and pray too much

hi-caps - 1 mag lasts ya ages if you are travelling very light - like gun5 only - no pouches n not carrying the kitchen sink etc....

Well I am a bit of a gear freak..... looks like I'll go for a few mid caps and keep the hi cap in reserve ready for when that s#! ¥ gets real!

 

[Fumps]

I take 5 mid caps & 1 high cap just in case it gets messy.

I personally prefer mid-caps simply because I enjoy reloading under fire, its all about fun at the end of the day & if you enjoy doing your hardcore reload then go for the mid-caps.

there is never a right or wrong, just what you perfer

 

[paulcotton]

5 mid caps and 1 hi cap = 950 rounds (+ re-loads) =

 

[Sacarathe]

If you're going to run a hi-cap backup with midcaps, make sure it's full so it does not rattle.

5 mid caps and 1 hi cap = 950 rounds (+ re-loads) =

Depends on the gun, mid cap sizes vary, can be over 200 though.

 

[paulcotton]

Does the wind up on the hi cap reduce the rattle?

If you're going to run a hi-cap backup with midcaps, make sure it's full so it does not rattle.

Depends on the gun, mid cap sizes vary, can be over 200 though.

 

[Sacarathe]

Does the wind up on the hi cap reduce the rattle?

Afraid I don't know, I've never actually held a hi-cap.

 

[callumbagshaw]

It's preference, one thing I'd say though is that if you like hi caps, before you get too attached to the spinny wheel things on the bottom, get a flash mag or two (google it) - they're the future, but some players still seem skeptical.

 

[cropzy]

MIDCAPS BROTHER DISREGARD HICAPS!

 

[GunmanAirsoft]

Does the wind up on the hi cap reduce the rattle?

Here's how they work...

The top bit of the magazine is a hopper which you fill with BBs. The bottom bit has a clockwork mechanism that feeds the BBs up a short tube to the top of the mag and into the gun. The winder just winds it up, as you fire the spring unwinds, turning a wheel which picks up the BBS.

The rattle comes from the BBs in the hopper part as they are loose and free to move about inside the mag

If you fill up the mag, wind it, then top it up it will rattle less, but as you fire there are less BBs in the mag and more empty space so more rattle.

Mid and low caps have a really long tube that goes round and round the inside of the mag with a compression spring inside. You feed the BBs in from the same hole as they feed out of the mag and into the gun. The spring expands to fill the space in the tube behind the BBs therefore no rattle.

The downsides to mid and low caps are the lower capacity and you need to use a speed loader or push the BBs in one at a time, kind of like loading a real magazine.

Carrying a partially full speed loader will create the same rattle as a partially full hi cap however...

 

[callumbagshaw]

^ There's a lot less rattle from a flash mag too (you'll never get zero rattle unless you switch to 9mm's though)

 

[Lozart]

It won't rattle if you leave it in the safe zone....