Gun loadout/setup help thanks

Found my torch brand it’s A surefire m600 model with a pressure plate back 

 
@Veqtah it's probably a Surefire clone as most real ones are in excess of £100... If not multiple hundreds.

If you'd like anyone to have a look at it then feel free to drop a link but most of the clones tend to be spot on for slinging plastic.

I'd also take note of Roger's point. A lot of airsoft is a matter of personal preference and it'll take some experimentation to form your own opinions, and to find what works for you.

 
Last edited by a moderator:
Veqtah said:
Found my torch brand it’s A surefire m600 model with a pressure plate back 
Click to expand...
Click to shrink...
real or clone like this

https://www.amazon.co.uk/AIRSOFT-EMERSON-SUREFIRE-STYLE-WEAPON/dp/B00PY0DTSQ

i had a similar one on my G33 for using at UA, the wire came out of the pad so i got another one, as link (first one only had pad) and put the pad on one and cap on the other, two working torches!

Also use a Eotech clone but forget and tend to watch the BBs!  :lol:

but whats posted will be fine at UA for the darker rooms, tracers ive used a few times but tend to not bother anymore. TBH, i now use the LED lenser 7 series with gun mount as has other uses when im not playing and then i dont get moaned at by the wife for buying stuff i never use!

You are aware that UA is supposed to close come the summer, they have been saying for ages but i think it may be it this time so maybe dont rush into anything if you have to change game site

 
Yeah it’s only a replica, found a couple of them on eBay and messaged a guy to see if they sold the pressure plates separate which they do, about £14 if anyone can find cheaper then will be buzzing also, and good pressure plate holders that screw onto the barrel ? Or any alternatives other than messy tape or paracord like I did last time, 

 
Go for T1 replica, you can then put on a scope cap (I prefer butler creek) and then put a lexan disc inside which you can buy on ebay (pictured below): 

Also, to stick your pressure plate on the gun just use velcro with sticky side, it doesn't make a mess or leave residue from my experience. 

View attachment 45165

 
I run a CompM4 replica on my M4 for the most part. Also own a T1, 551, x4 ACOG and a reflex (which is the cheapest and clearest x1 of the lot).

I've tried vertical and angled foregrips but I think I prefer it without if I'm honest. 

Sometimes run a torch but the sites I play at don't have many buildings for it to become useful. +1 to the velcro as suggested above

Just go out with it and find out what you need as you play. Less weight = better when it's 4 hours in and your arms ache because your gun weighs x3 as much because of all the attachments!  :lol:

 
Last edited by a moderator:
Lasbrisas17 said:
Also, to stick your pressure plate on the gun just use velcro with sticky side, it doesn't make a mess or leave residue from my experience. 
Click to expand...
Click to shrink...


i used some Velcro once but found it kept coming off the actual gun body!. May have been the stuff that cam with the gun as the 3M stuff i have for the other is much better

@Lozart what was it you had for your cable / pad, some clips you got off a Chinese type website'??

 
I remember using Velcro on my old pressure plate and didn’t work at all, kept coming off of the back of the pressure plate becuase it’s rubber, if anyone knows any strong stuff or anything else 

 
where do people put their pressure plates? I am getting one and not sure where to mount it also getting a AFG2 so not sure if I am supposed to put it on there or something. 

 
Musica said:
where do people put their pressure plates? I am getting one and not sure where to mount it also getting a AFG2 so not sure if I am supposed to put it on there or something. 
Click to expand...
Click to shrink...


Thats a specific use case. It's different for everyone.

Put it where your hand goes naturally OR where you can reach comfortably when activating whatever it is your turning on.

 
I would echo what others have said.  I wanted all the attachments when I started and ended up with this.

View attachment 45185

Holo sight, foregrip, rail panels, torch, pressure switch, even a go pro mount on the bottom.

View attachment 45186

Then you realise this is a lot of added weight which isn't always necessary.

So now have this

Iron sights removed,  rail panels gone, torch off unless I need it, rail section on bottom if I do (though not in this picture)  also a sling is a worthwhile purchase imo, as it does carry a little of the weight which is a bonus at the end of a long day.View attachment 45191

The torch can be put on if I need it. I use this switch mount as it slides on and off the top rail

View attachment 45192

But am looking at one of these on Ebay's it has a permanent on/off or pressure on/off, about 15 quid

View attachment 45193

 
Last edited by a moderator:
djben9 said:
@Lozart what was it you had for your cable / pad, some clips you got off a Chinese type website'??
Click to expand...
Click to shrink...


"got off a Chinese type website"...bloody cheek. They're Streamlight rail clips https://www.ebay.co.uk/p/Streamlight-88178-Replacement-Remote-Retaining-Clips-for-Flashlight-Black/25021500473?iid=192600692804&chn=ps

MagpieAirsoft said:
But am looking at one of these on Ebay's it has a permanent on/off or pressure on/off, about 15 quid

View attachment 45193
Click to expand...
Click to shrink...


I have one of those I don't use anymore if you want it? £10 posted?

 
@MagpieAirsoft do the pressure plate switches with the constant on fit the m600 replica like mine ? Also can you throw a link over for the first one you posted aswell?

 
Veqtah said:
@MagpieAirsoft do the pressure plate switches with the constant on fit the m600 replica like mine ? Also can you throw a link over for the first one you posted aswell?
Click to expand...
Click to shrink...


When you got the torch you should have two end caps - one with a little round socket and one with a rubber button. The little round socket is a standard connector so yes, the switch @MagpieAirsoft suggested will work.

As for the rail panels, just google for "element tango down scar panel" (if you leave out the element bit you'll get the actual Tango Down ones).

 
@Lozart sorry I didn’t see your post about having one for £10 would it fit my m600 sorry to keep asking but don’t want to buy it if it won’t fit, I’ve defo got both rubber end cap and the other one

 
You must log in or register to reply here.

Similar threads

M_P
  • Sticky
Gun picture thread
531 532 533
Replies
11K
Views
2M
ButcherBill
ButcherBill
Back
Top