• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

Thought I'd put this question out there....

team flex said:
about 6ish months. Loads more to learn, but all the basics i know, like to pass on the information I do know, and there is always more to learn :D
Click to expand...
What are you using as your primary? I'm waiting on a WE G26 to arrive :)

 
Just saying, dont even think about wearing the mesh mask. I have seen a video of someone shoot at the mesh with a 350fps gun and it went straight through.

(The package James linked)

 
Last edited by a moderator:
Steelrain said:
What are you using as your primary? I'm waiting on a WE G26 to arrive :)
Click to expand...
I use a G&G cm16 carbine, great gun, have been for 6 months, not upgradede any internals nor cleaned it and it still runs like a dream and outshoots other mcuh much more expensive guns!

Steelrain said:
This looks like a bargain, Great shout!!

Opinions would be very much welcomed.
Click to expand...
its good, I would swap out the face mask although I have used them and they do hold up, depends on how much you care about your eyes.

 
Josh95 said:
Just saying, dont even think about wearing the mesh mask. I have seen a video of someone shoot at the mesh with a 350fps gun and it went straight through.

(The package James linked)
Click to expand...
Also as a fashion statement.... I think wearing it would make me more of a target haha. Cheers

 
Steelrain said:
I was looking at some Bolle glasses...

http://www.proairsoftsupplies.co.uk/acatalog/BOLLE-Rush-Smoke-RUSHPPSF.html
Click to expand...
bolles should be ok but IDK much about them, I believe the glasses have the certificate but not the goggles or something like that, IK a lot of people use bolle glasses on here, just go on the quick questions and answers thread and ask or post a new status update or even on here. there is a video, I reckon they are safe. You should always fire them a few times beforehand just to check. Are you gonig to wear a mesh lower? BBs can take out and have taken out teeth... however a lot of people don't wear mesh lowers. I have been shot in that area although I always wear a mesh lower.

On another note, 1k posts!

 
Airsoft World are doing some metal receiver Combat Machines for £150 in run up to Xmas. Apparantly they guarantee it the best offer in UK. In black or Dark Earth with individualised serial numbers. Doubt they will be in stock for long though. Details were on their e-newsletter, can't link off my phone sorry!

 
JamesAirsofterAgent said:
Some people say the glasses fog up, but not tooooo sure.

Some sites may require you wear a full face mask depending on your age.
Click to expand...
Yeah I used to wear full face for paintball and they were fine but expensive......

I would imagine glasses to be ok as the air can get around them depending on what your wearing ie scarf etc

 
team flex said:
bolles should be ok but IDK much about them, I believe the glasses have the certificate but not the goggles or something like that, IK a lot of people use bolle glasses on here, just go on the quick questions and answers thread and ask or post a new status update or even on here. there is a video, I reckon they are safe. You should always fire them a few times beforehand just to check. Are you gonig to wear a mesh lower? BBs can take out and have taken out teeth... however a lot of people don't wear mesh lowers. I have been shot in that area although I always wear a mesh lower.

On another note, 1k posts!
Click to expand...
I'll ask around before I purchase something, I wasnt thinking about wearing anything lower although i did see this earlier

http://www.military1st.co.uk/11666105-mil-tec-neoprene-half-face-mask-coyote.html

 
Steelrain said:
I'll ask around before I purchase something, I wasnt thinking about wearing anything lower although i did see this earlier

http://www.military1st.co.uk/11666105-mil-tec-neoprene-half-face-mask-coyote.html
Click to expand...
doesn't really look like it would stop a bb. I recommend buying one, they are like 5 quid on ebay, see how you get on with it and if you don't feel like wearing it no one will stop you, depends what you feel comfortable with.

Steelrain said:
Congratulations :)
Click to expand...
cheers :D

 
Trouble is that deal from airsoft world... I won't be registered in time :(

 
Oh wow I didn't realise there was only a thousand of those 30th anniversary models, or that they were metal!! :( :(

I'm not allowed any more airsoft guns so it's not gonna be possible for me to get one.

Damn.

 
Last edited by a moderator:
You must log in or register to reply here.

Similar threads

E
Sites worth travelling to.......
Replies
16
Views
644
Jaylordofwaargh
Jaylordofwaargh
T
DMR newb question
Replies
7
Views
581
Rogerborg
Rogerborg
Mtemprell
Clutch precision
Replies
11
Views
1K
Anonymoose
Anonymoose
F
  • Locked
Update on Stolen Kit
2
Replies
20
Views
2K
Jez_Armstrong
Jez_Armstrong
ruskitseller
Calling any Crye Precision experts - A question about fakes...
Replies
7
Views
2K
TheFull9
TheFull9
Back
Top