Whats on your 'to buy list'?

[kejot]

all i want is some more E/P mag midcap's,

CB radio pouch & CB bfg pouches

and waiting for my streamlight tlr-1s to arrive

 

[Mitchell Gee]

Im getting a Tokyo Marui Blowback SOPMOD (with a bit of luck) and I hope to get a Glock 23 and desert tigerstripe gear to match my vest...

My gun: http://www.airsoftworld.net/airsoft-guns/t...ck-arrived.html When its in stockVest: http://www.airsoftworld.net/tactical-equip...land-cammo.html

Out of stock again

Mask: http://www.airsoftworld.net/bulletproof-mask.html?p=2

Some boots,Jacket and trousers and some M4 Mags

if i have missed something important please tell me

Nothing missing there apart from maybe a spare mag... but i wouldn't buy G&G if I was you, I made that mistake and I regret it...

Heres a list of things that happened:

Only G&G Mags feed

Hop up broke

Dust cover broke

Motor over reved and the fuse blew

Barrel came upside-down, making the hop up impossible to adjust hop up

Heres more things that happened to someone I know who owns the same gun:

Barrel fell of

Trigger snapped

After trigger was replaced it dropped to 290fps

Gun stopped feeding any mags

I hate the gun with a passion, when it works it's great, but it spends more time falling to pieces than anything else

 

[trooper whitten]

You name it...I want it.
ICS L85

Molle Belt w/ Yoke and pouches

E mags

CA Sportline AK47

Various bits of kit

Or failing getting the L85, I want a cheap full metal M4A1 with retractable stock (if I could find a JG or Dboys somewhere in the Uk, that'd be divine).

hi mate

if you look at actionhobbys they have loads on m4a1

there is a aps for £169 or a g&g for £164 with batt and charger?

hope this helps

 

[MZKaleem]

i wouldn't buy G&G if I was you, I made that mistake and I regret it...
Heres a list of things that happened:

Only G&G Mags feed

Hop up broke

Dust cover broke

Motor over reved and the fuse blew

Barrel came upside-down, making the hop up impossible to adjust hop up

Heres more things that happened to someone I know who owns the same gun:

Barrel fell of

Trigger snapped

After trigger was replaced it dropped to 290fps

Gun stopped feeding any mags

I hate the gun with a passion, when it works it's great, but it spends more time falling to pieces than anything else

MITCHELL half those things happened because you

A) Took apart the hop up, no offence but you probably didnt know how to put it together...

B ) They are G&G give 'em a break, they aren't a clone company remember that!

C) You told me your brother took off the motor and that was why it stopped working.

D)Albert's FPS dropped, wow big deal. FPS doesnt mean anything.

E) He doesnt have any G&G mags, remember?

Maybe you need to think, G&G's work fine, just buy G&G mags...

 

[Finius]

hi mate if you look at actionhobbys they have loads on m4a1

there is a aps for £169 or a g&g for £164 with batt and charger?

hope this helps

I've since changed my mind; I'm not going for a complete rebuild, so I'm just going to buy a CA sportline as a base and completely start over; but thanks anyways

I'm starting to be persuaded away from my ICS L85 fancyings...The custom M4 I've got in my head is just so tempting D:

 

[M_P]

whip it up on pimp my gun, let us see

 

[Finius]

This going to be a fairly long post

That's the gun, as best as Pimpmygun can reproduce.

Here's what will be different on the end product:

1. Stock will be slightly different, it'll be the ACM Socom, featured on RSOV: CLICKY

2. Pistol grip will be SPR style, as will trigger guard: Grip - Guard

3. Ironsights will be different, particularly the front. Front Sight. - F.A. Glow Bar - Rear sight

4. I'll be using this receiver: G&P Widowmaker

5. This flashider: CLICKY

6. This charging handle: CLICKY

-CA M15A4 sportsline base.

-Will be using STAR E-mags.

-The ACM stock looks very thin and long, I'll be shortening it and then getting some foam cut to go round it; it beats paying nearly £100 for the similar G&G version.

-The internals will be entirely reworked. New receiver comes with a metal hop, I'm then rebuying everything for the gearbox (including the shell), aside from the electrics.

-Probably gonna get a tightbore too, dependant on how decent the stock barrels are in CA Sportsline.

-I'll be trying to use "proper" brands as much as possible; the china stuff listed there is because the build I presently have needs to fit within a budget, but this will probably be a rolling project over the next six months.

-Things like Delta rings etc I'll probably eventually replace too.

 

[M_P]

looks good, by the way, madbull make that stock too, might be cheapr but im not sure.

that cahrging handle is a beast- you could kill with that lol, same goes for that flash hider

FYI, the inner barrels on the sportlines are ok, but nothing special

 

[Finius]

Glad you approve

Didn't know Madbull did a version, will look into it for sure!

Charging handle's definitely very cool, might go further eventually and get ambi selector and mag release switches, just for cool points (I'm right handed, but whatever).

As long as they're fairly okay, that'll be fine; most barrels go from okay to spot on when you clean them out properly

 

[M_P]

its funny how one of the most unique parts is the STANDARD handguard, i habent seen an M4 on the field with one for ages lol

 

[Finius]

I know, it's becoming seriously neglected, yet is, IMHO one of the nicest bits you can have on an M4. I may put rails top and bottom for a grip and PEQ, but to be honest I'm not sure it's what I want to do, it'd spoil the "clean" look of the handguards...

 

[M_P]

Another option is the one with rails molded into it, made by i think its.... fab defense or something

 

[Finius]

Just checked that out, looks pretty funky, might look into getting one of those as well

 

[Airsofter123]

My to buy list is basically just a custom M4 stock, but I have no idea where to get one made

Basically I'm looking to have one with a sheath built into it, rather than having to strap the knife to the side of it.

Then I'll just need to find a couple more add ons and my M4 will be complete

 

[Matt!]

Why not buy those and whack a sheath inside? you could easily pad out the rest of just tear it about and attach the sheath to the straps.

 

[Airsofter123]

Yeah, might give something like that a go. Might be a bit tough for me to get the right angle but sure to be one hell of a lot cheaper

 

[Mitchell Gee]

why would you want a sheath on your gun anyway? not knocking the idea, just asking...

 

[M_P]

Why not? stops his rifle looking the same as every other m4 on the planet

 

[Airsofter123]

I'm cross dominant (left handed but right eye dominant). As such I shoot pistols and use knives left handed, but shoot rifles right handed. This means that my left side is pretty cluttered as it is - it's got to take dump pouch, pistol and magazines, and I don't like drawing knife from right hand side (it'd either be on my shoulder so make shouldering the rifle tricky, or where my pistol mags go). So stock is the best place I can think of mounting it (also makes for fast knife draws thanks to cross dominance, finally good for something ) A lot of trouble I know, but worth it for the odd knife kills

Basically, going for something like this



The aimpoint on top is supposed to be a 2-6x AOE scope, and knife is supposed to be in a scabbard on other side of gun

 

[Tristan Orr]

Well, since I have my New G&G M4 (G4) CQB-H yes with Magpul MOE hardguard in Dark earth (don't judge me). I just need to work on my gear for Ground Zero.

So this is what I'm looking at getting:

Commander Soft Shell: http://www.military1st.co.uk/bl-cmr-fm-01-...cket-black.html

Warrior Chest Rig: http://www.uktactical.com/acatalog/Warrior...Combo_MK_1.html (along with admin and dump/drop pouch and a riggers belt)

Blackhawk P226 holster in Tan: http://www.uktactical.com/acatalog/Serpa_T...eg_Holster.html

KWA P226 (to go with the holster ofc): http://www.airsoftworld.net/airsoft-guns/a...ing-pistol.html

A-TACS trousers: http://www.landwarriorairsoft.com/acatalog/A-TACS.html

and last but not least

Spec ops shirt in black: http://www.viperkit.co.uk/site/clothing-bo.../prod_1520.html