• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

What Batteries will fit my TM MP5?

Not sure if these need 7.4v or 11.1v (I'd always go for 7.4v to be safe but someone will confirm)

I'd suggest something like:

https://www.vapextech.co.uk/airsoft-7-4v-2600mah-25c-lipo-cranstock-battery-with-case-lp305-vapextech

The Milliampere Hours (mah) determines how much total power a battery holds (ie how long it will last)

The C rating determines how much power it can deliver per trigger pull (20c is the lowest and 30c is usually the highest you can get)

Remember you will need a GOOD intelligent charger to take care of these batteries and prevent fire.

This is the cheapest I can find with a quick search.

https://hobbyking.com/en_us/turnigy-accucell-us-plug-c150-ac-dc-10a-150w-smart-balance-charger.html

 
Last edited by a moderator:
What's the rps with one of them batteries? Also I jus bought a new handguard from some dude on eBay for a ngrs so hopefully it fits hahahaha, thanks 

Not sure if these need 7.4v or 11.1v (I'd always go for 7.4v to be safe but someone will confirm)

I'd suggest something like:

https://www.vapextech.co.uk/airsoft-7-4v-2600mah-25c-lipo-cranstock-battery-with-case-lp305-vapextech

The Milliampere Hours (mah) determines how much total power a battery holds (ie how long it will last)

The C rating determines how much power it can deliver per trigger pull (20c is the lowest and 30c is usually the highest you can get)

Remember you will need a GOOD intelligent charger to take care of these batteries and prevent fire.

This is the cheapest I can find with a quick search.

https://hobbyking.com/en_us/turnigy-accucell-us-plug-c150-ac-dc-10a-150w-smart-balance-charger.html
Thanks ? 

 
Duno what rps you'll get but I imagine around 20?  (Don't try and get ridiculous rps as that gets regarded as a wanker gun)

 
What's the rps with one of them batteries? Also I jus bought a new handguard from some dude on eBay for a ngrs so hopefully it fits.


I'll run it through the chrono tomorrow and find out. The NGRS will have a much lower rate of fire than a high cycle, i think.

From what i've seen all the MP5A3/5 foregrips should interchange. People put the VFC/Surefire, H&K MLI, Midwest Industries,etc on them all with the only issue being battery space on some.

 
I'll run it through the chrono tomorrow and find out. The NGRS will have a much lower rate of fire than a high cycle, i think.

From what i've seen all the MP5A3/5 foregrips should interchange. People put the VFC/Surefire, H&K MLI, Midwest Industries,etc on them all with the only issue being battery space on some.
Thanks so much mate, I'm not sure if batteries that are 1300Mah will be enough, so I'll probably either go with the one you've recommended and the other guys, and that should be good ?

Duno what rps you'll get but I imagine around 20?  (Don't try and get ridiculous rps as that gets regarded as a wanker gun)
Hahaha, at my site you get happy looks when you do that, i had a SSG1 before this, and in them tricky situations, turn that to full auto, your getting out of that situation ?

 
I have a bunch of two cell (7.2v) crane stock lipos in mine, work great but I have pimped out all the internals to match ... 

 
I have a bunch of two cell (7.2v) crane stock lipos in mine, work great but I have pimped out all the internals to match ... 
Thanks alot, I've only just got the gun second hand, the fire selector just fully broken off, ima probs be selling it once I fix it, it's a bummer though as I've got to return stuff I can and also sell some stuff because it can't be returned, I'm thinking of a KWA Eve now, thanks though 

 
Back
Top