• 2FA temporarily disabled, emails not working

    Two factor authentication (for most of you 'email a code') has been temporarily disabled while we figure out why emails are not being received by large numbers of users. Emails are not sending site-wide. Please continue to use AF-UK as normal but note that you may be asked to log back in once this is re-enabled.

Saiga 12 zentico stock

I've not done it but it seems like it would be pretty straightforward with a 1913 end plate and a 1913 adapter for the Zenitco stock.

 
I bought the 5ku CYMA one and other then drilling the folding pin to accept the TM pin, there was a lot of dremel’ing to get it to fit (2-3mm off the top, flattened bottom and flattered face, could also do with more profile as the catch has to be pressed). I posted some pics up on the HRC discord.

 
I've not done it but it seems like it would be pretty straightforward with a 1913 end plate and a 1913 adapter for the Zenitco stock.
Apparently they have been out of stock for over a year the 1913 to zentico adapter. Would probably see if a commercial company like Airtac or someone similar could 3d print them 

 
Back
Top