I am looking to get the TR16 and I am planning to upgrade it for fun (no FPS limit) . At the moment I have decided on the ASG boost ultimate motor, maple leaf delayer hop up nub, maple leaf macaron 70 degree bucking, an M105 spring and the modify hybrid 6.03 precision barrel, 469mm. Is there anything that anyone else would do differently for this gun, my price limit is about £570.
-
Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.
The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here
If you have any issues please post about them in the Forum Feedback thread: Go Here
G&G TR16 MBR 556WH upgrades
- Thread starter TM27
- Start date
concretesnail
AF-UK patch owner
- Jul 5, 2020
- 660
- 371
Check your inner barrel length, so you don't go longer than stock, as the cylinder is ported and the gears are short stroked to match.
concretesnail
AF-UK patch owner
- Jul 5, 2020
- 660
- 371
All good then, carry on. It might be worth trying the stock motor, it's not bad and I'd swap the stock mosfet for the perun etu++ unit.
More setting adjustment and more robust.
More setting adjustment and more robust.
Last edited by a moderator:
- Thread starter
- #6
I was planning on getting the perun hybrid mosfet. Will the mosfet make the ETU useless or can I have both at once?
concretesnail
AF-UK patch owner
- Jul 5, 2020
- 660
- 371
You can't have both really. The hybrid replaces trigger contacts and uses optical and magnetic switches. The etu++ has all the same settings/features, bar trigger depth and sensitivity, but as it uses the g&g electronic trigger unit you retain the stop on empty, have a much easier fitting (just plug it in to the g&g loom) and it's two thirds of the price.
- Thread starter
- #8
I am going to get the hybrid as the trigger sensitivity was one of the main reasons I wanted it. Thank you for the help.
Similar threads
