• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

Macks airsoft dreamers of the week thread

Talltom said:
Haha we could test

Tezza what's 2x(2+2)
Click to expand...
So, 2 x is by 2, and in parenthesis (2x2) would equal 4.

So 2x4 would = 8. Good enough?

2+2 = in itself ?

If you are looking for an new accountant that is the ultimate question to ask...

And the reply you want to hear should be 'what figure did you have in mind'...

Loadsa larfs....

P.S. there seems to be some 2x4's out there.....

 
Talltom said:
Haha we could test

Tezza what's 2x(2+2)
Click to expand...
I am a real person, and if you carry on then you will be assimilated, and resistance is futile...

Chill...

L3wisD said:
I removed the advert after it was clear it was completely nonsensical and was circling the drain.

Maybe if he'd put his hand up and said:

"You know what? I've got my Glock Generations mixed up - my bad"

That would be fine. We could have worked with it.

I sometimes get Gen 3 & 4 mixed up myself (like last night when I asked @rocketdogbert what the difference was with the new Glock, and one of the first points was that this is actually a Gen 4...)

But yes, it's quite clear that this is all now some fantasy knocked up in his head like a good old fashioned "my dad could beat up your dad" playground boast.
Click to expand...


AlphaBear said:
After watching the Will Smith Aladdin movie last night on Disney, I got my TM Gen 3 out and started to rub it in a manner in which it shouldn't be rubbed in the hope that it would turn into a Gen 4. Believe you me when I say this, one a moment it did... but then I could have just imagined it  due to the fact my hands were getting a tad hot... You just can't make this sh#t up can you lol... 
Click to expand...
Rub it as much as you like, but it will never be anywhere as good as the Gen4...

Many peeps seem to have got me wrong.

Some of my posts were in jest.

Chill friends, and don't b so quick to snipe please.

 
Tezza said:
it will never be anywhere as good as the Gen4...
Click to expand...


I may have missed something here but in airsoft terms, what makes the TM Gen. 4 G17 vastly superior than the Gen. 3. Although Tbh that's more rhetorical as I know you don't know, because you haven't used a TM G17 Gen. 4.

 
Cr0-Magnon said:
I may have missed something here but in airsoft terms, what makes the TM Gen. 4 G17 vastly superior than the Gen. 3. Although Tbh that's more rhetorical as I know you don't know, because you haven't used a TM G17 Gen. 4.
Click to expand...
I suspect it’s a step change, not vastly superior.

It has all of the updates of the G22 and G19 from TM (Including protected slide stop so it can’t wear prematurely ??)

Plus the slide is the same size as real steel now, so you can use real G17 holsters, and it has the ambidextrous mag release 

 
rocketdogbert said:
I suspect it’s a step change, not vastly superior.

It has all of the updates of the G22 and G19 from TM (Including protected slide stop so it can’t wear prematurely ??)

Plus the slide is the same size as real steel now, so you can use real G17 holsters, and it has the ambidextrous mag release 
Click to expand...


Unlikely I know but it could be prone to failure in another area. Besides, didn't this start because they posted a picture of an Umarex airgun? 

 
Cr0-Magnon said:
Unlikely I know but it could be prone to failure in another area. Besides, didn't this start because they posted a picture of an Umarex airgun? 
Click to expand...
ha ha yep, and unlikely, the G22 with the reinforced Slide stop, and the G19 with the larger BBU have been a round long enough to show up design failures.

You'd be better off asking @Tezza though, he’s an official TM prototype tester after all

 
Last edited:
Then dont. Neither of you two have have to buy it. Don't you have anything better to do with your lives than critical of people's posts? If you don't like how much I'm selling it for don't buy it. Pretty simple.

 
STORMZOMBIES said:
Then dont. Neither of you two have have to buy it. Don't you have anything better to do with your lives than critical of people's posts? If you don't like how much I'm selling it for don't buy it. Pretty simple.
Click to expand...
That’s the point of Mack’s though?

 
STORMZOMBIES said:
Clearly nothing better to do with you lives.
Click to expand...
Actually, it’s quite nice being able to show members with less experience how to avoid paying too much for airsoft kit, makes for a nice sense of community.

After all, it is a truism that what goes around comes around.

 
STORMZOMBIES said:
Then dont. Neither of you two have have to buy it. Don't you have anything better to do with your lives than critical of people's posts? If you don't like how much I'm selling it for don't buy it. Pretty simple.
Click to expand...
Mate, it is the complete point of Mack's, some people get it, others bite lol

View attachment 58081

 
Is £200 a bargain for an Asg gbb mac11 with the wrong suppressor and 2 spare mags?

on prefired 

 
Last edited by a moderator:
Thank you 

guess I'll buy a new one when available 

for an iconic item like a Mac 10 or 11 I would also want to wait for the correct suppressor 

feeling the need  to channel chuck Norris 

 
Last edited by a moderator:
osteoshot said:
Is £200 a bargain for an Asg gbb mac11 with the wrong suppressor and 2 spare mags?

on prefired 
Click to expand...
I picked one up with 3 mags, the right suppressor, & a matching shoulder holster for £75, yep it was a monster bargain, but I quickly sold it on, tbh they're not that skirmishable, silly rate of fire means you need a ton of mags.

For £200 I'd be expecting about 6 mags to make it worthwhile.

 
You must log in or register to reply here.
Back
Top