• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

KWA Kriss Vector Owners Club

Guys... I was shooting my vector and all of a sudden it stopped, took the mag out and out comes half my loading nozzle and nozzle spring. What the heck? Has this happened to anyone?

View attachment 46635

View attachment 46636

Cracked right in half!!!!

ordered an airsoft engenuity nozzle as a replacement but what the heck? How did this happen? Ideas? Am I the only one?

 
Jayshhli said:
Guys... I was shooting my vector and all of a sudden it stopped, took the mag out and out comes half my loading nozzle and nozzle spring. What the heck? Has this happened to anyone?

View attachment 46635

View attachment 46636

Cracked right in half!!!!

ordered an airsoft engenuity nozzle as a replacement but what the heck? How did this happen? Ideas? Am I the only one?
Click to expand...


What gas where you running it on? I’ve seen it on a few, but only on black gas or too high HPA pressure 

 
rocketdogbert said:
What gas where you running it on? I’ve seen it on a few, but only on black gas or too high HPA pressure 
Click to expand...


Green gas...

I fixed the trigger and the sear it was shooting at low FPS around 300, played a few games and then it broke.

how does this even happen?

 
A couple of reasons. It may have been run on something more powerful in the past, and been weakened, or just the nozzle becomes brittle over time.

Either way, the AE nozzle will work very well , but you may have to fettle it a little to get a perfect fit

 
Last edited:
Hey guys my boyfriends vector has been in the shop for about 7 months.... it’s works but only in burst or full auto 

semi stopped working....any ideas?

the tech said it’s his selector box and hammer that needs replacing any idea where I could get either of these???

 
Hey guys,

installed the AE nozzle and now my guy sometimes jams and double feeds

any ideas?

 
Yup, did you make sure it fitted perfectly before firing it up?

AE themselves say it often needs a bit of sanding to fit, particularly around the pins and runners at the front of the bolt

 
rocketdogbert said:
A couple of reasons. It may have been run on something more powerful in the past, and been weakened, or just the nozzle becomes brittle over time.

Either way, the AE nozzle will work very well , but you may have to fettle it a little to get a perfect fit
Click to expand...


For anyone reading, AE is great. Answers all my questions, genuinely wants to help me fix my gun. 

@rocketdogbert you are also awesome. Thank you so much

i did sand it down to clean up some of the imperfections, will shoot a few bb at lower FPS and weaker blow back then jam or shoot 2 Bb then the bolt gets locked back. 

Even with some dry fire, at times, the bolt locks back as if I was out of bb

 
I would suggest having another look at the nozzle make sure it’s moving freely.

They can sometimes jam in the hop as well, even with a standard nozzle. You’ll see this by damage on top of the nozzle as it sticks out and the bolt try’s to drop but can’t.

Do you still have the standard nozzle?

 
If anyone is selling a KWA Vector... I want one, PM me thanks

I think that paint looks cool!

 
You must log in or register to reply here.

Similar threads

Khyber
'Owners club' forums
Replies
4
Views
2K
Khyber
Khyber
C
Kwa Kriss Vector Parts - 3d Milling Operation
Replies
2
Views
939
Guest
G
Marksman1933
Advice Regarding My Kwa Kriss Vector
Replies
3
Views
627
hitmanNo2
H
A
Possible new site Northants area
Replies
11
Views
2K
AlphaBear
AlphaBear
P
A Call for Revolution: Supercapacitors in Airsoft
2
Replies
30
Views
3K
Sewdhull
S
Back
Top