• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

DIY

The lemon bottles are just about the right size, not so big that BBs spill all over, but not too small that the BBs jam and flow is restricted.

I reckon BB bottles are just a bit too big, and would spill more easily when loading up mags.

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Next project, DPM radio pouch cover.

Don't usually run DPM and comms, but need it for a specific event next weekend.

View attachment 38203

 
Last edited by a moderator:
Any bottle with a diameter of 2-2.5cm would probably do.  I orginally went with the lemon bottles for the insert, which I am no longer using.  The lemon bottles are 2.5, If I find a bottle that is slightly smaller may try that.

BB bottles and water bottles seem a bit too big, could still work , but would need to be more carefull when filling mags/speedloaders.

 
DIY extended hop window.  Bit rough, but hoping it will give me a more range.

Mainly done with a dremel-like tool and then hand file.

Will be just flat hopped for now, might try ER Hop later on.

Cheers

G

View attachment 40205

 
Necro-ing this as I have modded my S Thunder Launcher to auto open from pressing the chamber release... Drilled a small hole where I've put the arrow in the picture and installed a spring from a washing line peg which has enough push to open the chamber but not enough to miss-align the chamber from the firing pin.

View attachment 41516
View attachment 41517

 
That's a nice job.   I like the cord, but should note that I've never needed any extra retention on my Kydex holster for either a TRMR or a Dynatex.  Shaping them round the BFG, then removing it and reheating so that the holster contracts slightly seem to work for me.

Yours looks tacticooler though. ;)

 
clumpyedge said:
That looks good bud! I like the retaining chord idea! Hard to do?
Click to expand...
Not really it’s all in the preparation ! I made a couple of different shaped paper templates before I formed it so I had a pretty good idea where I was going before I made it .

@RogerborgThe ones I make for TRMR’s don’t need the shockcord they hold fine , this one (my first attempt at a Dynatec) I’ve put the bungee on as with out it could ‘jump out’ if I’m hurling myself about but I still want to be able to deploy it as quick as possible so it’s just under enough tension to hold it in but not enough that I can’t pull it off easily and just pop the nade out . ?

 
Hmm, thinking about it, mine may actually be too tight.  It takes a good hard tug to... urgh, filth.  I might slacken it off and try a bungie based solution - thanks for the idea.  Which I shall claim as my own if it works. :P  

 
Rogerborg said:
That's a nice job.   I like the cord, but should note that I've never needed any extra retention on my Kydex holster for either a TRMR or a Dynatex.  Shaping them round the BFG, then removing it and reheating so that the holster contracts slightly seem to work for me.

Yours looks tacticooler though. ;)
Click to expand...




Funny you say that but i lost a grenade last year due to a pretty shitty kydex holder from a popular place as well!

 
Supermoose said:
Made one for my impact grenade using half a silicone tube cut in half 

View attachment 41934

View attachment 41935

Also started on a 3rd person mount for the go pro today, got to fill Sunday’s without a game

View attachment 41936
Click to expand...
About the camera mount, I have been thinking about making one of these for a while. Nice, I'll be interested to see footage from the finished piece. Also to see how you got on with it/forgetting to allow space for it

 
Last edited by a moderator:
MisterG said:
Any bottle with a diameter of 2-2.5cm would probably do.  I orginally went with the lemon bottles for the insert, which I am no longer using.  The lemon bottles are 2.5, If I find a bottle that is slightly smaller may try that.

BB bottles and water bottles seem a bit too big, could still work , but would need to be more carefull when filling mags/speedloaders.
Click to expand...
BB bottle seem to have smaller tops now so will be fine.

I put some knee pads in my tiger stripe trousers.  Stitching is a lot better than my previous attempts.

View attachment 47901

Druid799 said:
So I bought one of these , 

View attachment 42076

And after a few hrs with scissors and sewing machine I now have one of these a molle dump pouch  .

View attachment 42077

And with the use of these buckles I can turn it back in to a drop leg dump pouch .?

View attachment 42078
Click to expand...
 Imight do somethiing similar for a holster for an Amoeba 003, looking to use that as a secondary.  Thanks for the inspiration.

 
Last edited by a moderator:
You must log in or register to reply here.

Similar threads

Matt.2504
Kydex holsters
Replies
15
Views
1K
Matt.2504
Matt.2504
Punisher3990
Issue with Revision Spider Wolf goggles. Advice.
Replies
8
Views
1K
Punisher3990
Punisher3990
K
Chest Rig & Belt - Layouts and Suggestions
Replies
9
Views
1K
Jacob Wright
Jacob Wright
H
Fma caiman nvg battery pouch
Replies
6
Views
524
Huxley
H
B
WE Sig F226 MK25
Replies
10
Views
937
Jaylordofwaargh
Jaylordofwaargh
Back
Top