Quick Questions & Simple Answers.

[E21A]

Is the main spring in the gearbox the only thing that can cause it to go twang and fire parts everywhere when you separate the casing? 

 

[ImTriggerHappy]

Is the main spring in the gearbox the only thing that can cause it to go twang and fire parts everywhere when you separate the casing? 

Yeah it is the main thing.

Put a screwdriver into the spring guide before separating the two halves and hold it in position. Be careful of the anti reversal latch spring as it is one of the most common lost parts.

 

[E21A]

I have a quick change spring so will just take it out first. Thanks 

 

[ImTriggerHappy]

I have a quick change spring so will just take it out first. Thanks 

That makes life way easier. 

 

[E21A]

Am I correct in thinking a consistent left curve on the BB is most likely a hop related issue? 

 

[heroshark]

Am I correct in thinking a consistent left curve on the BB is most likely a hop related issue? 

can also be a barrel issue . Either dirt or damage in the bore or crown. Can also be some thing fowling the exit, flash hider, suppressor or catching the outer barrel if poorly centered in the outer barrel. What's the gun?

 

[E21A]

can also be a barrel issue . Either dirt or damage in the bore or crown. Can also be some thing fowling the exit, flash hider, suppressor or catching the outer barrel if poorly centered in the outer barrel. What's the gun?

It’s an a&k masada SPR. Barrel is throughly cleaned and centred as far as I can tell. No suppressor fitted. 

 

[heroshark]

not catching on the flash? If  then its the hop or barrel.

 

[ImTriggerHappy]

Am I correct in thinking a consistent left curve on the BB is most likely a hop related issue? 

Its usually the bucking nub not centred. 

This can be caused by it either needs turning slighlty, it's damaged or the hop arm is not coming down square.

 

[E21A]

not catching on the flash? If  then its the hop or barrel.

Nah no catching on the flash hider. I’ve ordered a Airsoft pro hop unit, feeding chamber and nozzle. Will get a zci barrel when they are back in stock. 

Thanks chaps 

 

[emilianoksa]

Who makes Socom Gear gbb pistols?

Is it WE?

 

[LJ_1990]

Who makes Socom Gear gbb pistols?

Is it WE?

Yes, WE I believe. 

 

[emilianoksa]

Yes, WE I believe. 

Thanks.

 

[Lozart]

Who makes Socom Gear gbb pistols?

Is it WE?

Some, but not all. I had a Socom Gear M9A1 and it was pretty decent. They'd added an adjustable hop and tight bore barrel that the WE didn't have.

 

[Huxley]

Can you use a non bridged barrel in an aeg?

Numpty ordered the wrong one.

 

[Lozart]

Can you use a non bridged barrel in an aeg?

Numpty ordered the wrong one.

Nope, send it back.

 

[Huxley]

Nope, send it back.

Bugger figured as much, didn't realise I got the wrong one until too late to change.

 

[Lozart]

Bugger figured as much, didn't realise I got the wrong one until too late to change.

It happens. I have a Prometheus EG barrel sat doing nothing for similar reasons...

 

[tasum]

Hi I'm after a little help with a s/h we sig f229 I've just picked up. It's a bit battle worn and has no front sight.

Can anyone let me know how best to fit a replacement front sight? Got one on the way, but the slot on the slide has a small hole. I'm assuming the sight just slides into the groove. Is this correct? If not, does it need to be glued on?

I don't have the replacement yet, so I can't work out if it will slide in or will need to be glued on.

Thanks is advance for any help.

 

[Leader Bee]

Noob question ... Is 700 bbs enough to last a 4 hour cqb game?