- Condition
- Used
- FPS
- 325
A close to a real M4 as you can get in Airsoft. Brought direct from VT in 2025.
Comes with loads of spares.
18mm BGC * 2.
Spare chamber worn.
VT hop unit. (I don't have the original barrel)
4UAD unit in there.
Real colt Waffle stock
RS BCM grip, I lost the A2 can't find it anywhere
Viper Tech Green Gas Mag
Spare mag catch
Lots of spare orings and c clips
Soft (installed) and hard hammer sprig
RS KAC rails and broom grip
Guillotine Npas installed (one is slightly to the side in the bolt I've not used)
Slight bit of ware on the underside of the nozzle from installing the NPAS, hasn't affected operation.
Box is included.
Never Skirmished.
Collection only for this so you can see it before buying. Spalding.
You have to really know what you're doing with GBBRs to get this to sing, I don't play enough to warrant the keeping all this.
Cycles, bolt locks and fires fine, I just can't get it as accurate as I'd like past 30ms so a better man than me can probably sort it one way or another or it just needs to 5k bedding it rounds through it. I was waiting for Mech Hop to be released which is likely the key but that's been a while.
Comes with loads of spares.
18mm BGC * 2.
Spare chamber worn.
VT hop unit. (I don't have the original barrel)
4UAD unit in there.
Real colt Waffle stock
RS BCM grip, I lost the A2 can't find it anywhere
Viper Tech Green Gas Mag
Spare mag catch
Lots of spare orings and c clips
Soft (installed) and hard hammer sprig
RS KAC rails and broom grip
Guillotine Npas installed (one is slightly to the side in the bolt I've not used)
Slight bit of ware on the underside of the nozzle from installing the NPAS, hasn't affected operation.
Box is included.
Never Skirmished.
Collection only for this so you can see it before buying. Spalding.
You have to really know what you're doing with GBBRs to get this to sing, I don't play enough to warrant the keeping all this.
Cycles, bolt locks and fires fine, I just can't get it as accurate as I'd like past 30ms so a better man than me can probably sort it one way or another or it just needs to 5k bedding it rounds through it. I was waiting for Mech Hop to be released which is likely the key but that's been a while.
