- Condition
- Used
Early batch NE MP2, bought this while I was searching for one of the limited edition models which I have since found. This one will just end up sitting around so time to shift it.
This being a early unit was susceptible to a few known issues with the knocker and nozzle. I found no issue with the valve knocker, but the nozzle was giving some issues. It has since had the nozzle replaced with a current gen unit with the stand off spring, this eliminated the fps and hop issues it originally had. Also fitted is the newer recoil assembly with the shorter buffer. I have a replacement for the valve knocker and cutoff lever which I will include so that if it does ever have issues with the stock units it can be swapped over.
The 25rd Co2 magazine runs well, but would need a npas (MWS ones are a drop in, and what I have in my other uzi) to bring it down to site limits.
Slight wear on the back of the top cover where it meets the retaining latch but this is just due to the way the cover comes off and on.
£350 + postage
This being a early unit was susceptible to a few known issues with the knocker and nozzle. I found no issue with the valve knocker, but the nozzle was giving some issues. It has since had the nozzle replaced with a current gen unit with the stand off spring, this eliminated the fps and hop issues it originally had. Also fitted is the newer recoil assembly with the shorter buffer. I have a replacement for the valve knocker and cutoff lever which I will include so that if it does ever have issues with the stock units it can be swapped over.
The 25rd Co2 magazine runs well, but would need a npas (MWS ones are a drop in, and what I have in my other uzi) to bring it down to site limits.
Slight wear on the back of the top cover where it meets the retaining latch but this is just due to the way the cover comes off and on.
£350 + postage
