- Condition
- Used
- FPS
- 440
Hi All,
Reluctant sale of my DMR due to change in circumstances.
The DMR has been fielded a whopping 2 times! Both of which is preformed great.
List of Parts:
Polarstar Kythera
Wraith X HPA Buffer Tube
Wraith X Tank Stock
Spriti 13ci HPA Bottle
Cyma Platinum M4 Upper
Delta Armory 13" Handguard
14.5" Outer Barrel
6.02mm Tightbore Inner Barrel 363mm
Maple Leaf 75 Super Macaron Bucking + Omega Nub
1 x EPM-1s Mag
2x Saigo Defense Polymer M4 Mags
Holy Warrior Tango6T Scope
PEQ Box (Has 3 modes, red laser, flashlight, or redlaser and flashlight)
M-LOK Handguard
Bipod.
The good things:
Shoots pin straight
Looks and Feels Fantastic
Heavy
Currently shoots .32s @ 1.8J. Would recommend going .36 or higher. Under .32 will over hop.
The bad things:
The inlet fitting on the Kythera has a small crack in it, so would need to be replaced. These parts are roughly £9 and a pretty straight forward fix I just don't have the time. The gun still operates with the small air leak however it airlock occasionally due to said leak.
The original Cyma Platinum Lower was unfortunately cracked in half, when I fell into a container. The gun currently has a polymer lower on it, the body bolt does not go all the way through however the lower is on snugly and isn't going to fall off or affect alignment etc.
Looking for £700 which is a far cry from what it cost me, will consider reasonable offers.
Reluctant sale of my DMR due to change in circumstances.
The DMR has been fielded a whopping 2 times! Both of which is preformed great.
List of Parts:
Polarstar Kythera
Wraith X HPA Buffer Tube
Wraith X Tank Stock
Spriti 13ci HPA Bottle
Cyma Platinum M4 Upper
Delta Armory 13" Handguard
14.5" Outer Barrel
6.02mm Tightbore Inner Barrel 363mm
Maple Leaf 75 Super Macaron Bucking + Omega Nub
1 x EPM-1s Mag
2x Saigo Defense Polymer M4 Mags
Holy Warrior Tango6T Scope
PEQ Box (Has 3 modes, red laser, flashlight, or redlaser and flashlight)
M-LOK Handguard
Bipod.
The good things:
Shoots pin straight
Looks and Feels Fantastic
Heavy
Currently shoots .32s @ 1.8J. Would recommend going .36 or higher. Under .32 will over hop.
The bad things:
The inlet fitting on the Kythera has a small crack in it, so would need to be replaced. These parts are roughly £9 and a pretty straight forward fix I just don't have the time. The gun still operates with the small air leak however it airlock occasionally due to said leak.
The original Cyma Platinum Lower was unfortunately cracked in half, when I fell into a container. The gun currently has a polymer lower on it, the body bolt does not go all the way through however the lower is on snugly and isn't going to fall off or affect alignment etc.
Looking for £700 which is a far cry from what it cost me, will consider reasonable offers.
