- Condition
- Used
KS3 Angry gun KS-3 Marui M4 GBB MWS CONVERSION KIT - Limited Deluxe Version.
https://www.firesupport.uk/angry-gun-ks-3-marui-m4-gbb-mws-conversion-kit-dx-ver.html
£1,580.06
The conversion kit designed to replicate the Knights Armament Company (KAC) KS-3 / SR-16 rifle platform for Tokyo Marui MWS GBB. Tokyo Marui AR / M4 MWS GBB series. CNC 6061-T6 aluminum upper and lower receivers with a Cerakote Magpul Flat Dark Earth (FDE) finish and Sniper Grey accents, paired with CNC steel internal/external controls.
10.5-inch outer barrel, 11.5-inch URX6 M-LOK handguard, and a total net weight of roughly 2,440g.
- Tokyo Marui MWS Spec. 250mm Inner Barrel - 6.01mm bore 380mm custom EDGI - EBOG DESIGN
- Tokyo Marui MWS Spec. Hop-Up Bucking x 65degree
- Tokyo Marui MWS Spec. Hop-Up Chamber x - DYTAC CNC Aluminium Hopup chamber adjuster.
- Tokyo Marui MWS Spec. Bolt Carrier Group with Nozzle - Monolithic steel bolt carrier (Gen2 MPA Nozzle and 150% nozzle return spring)
- Tokyo Marui MWS Spec. Buffer Spring -Angry gun 110%, 130% & 150% buffer springs
- Tokyo Marui MWS GBB Magazine - Guns modify evo v3 magazines
Details part list.
- 2 additional bolts with them setup for specific conditions saving the need to fine tune at a venue. One setup for HPA the other black gas for colder days.
- 130% and 150% buffer springs
- Various length inner barrels as the current setup extends to the just shy of the suppressors end.
- HPA setup MES adaptor, 2 bottles, mags, reg & hose. See my other listing.
Had this up against a DCA & VFC KS1 and this out performs both by a marked amount. Genuine sale having purchased a DAS GBLS and keeping two high end RIFS that have an almost identical footprint makes no sense so unfortunately the KS3 has to go.
Has a few marks from use but are all cosmetic and could be covered.
Will be disappointed to see it go but was built to be used and is a waste as wall art.
£1600.00 no offers. Collection preferred due to price and given what it is.
I understand this is obviously expensive and it’s not for everyone, knowing such a purchased is limited to a small pool. Even at £1600.00 you’re making a huge saving whilst also getting a RIF excels in both CQB and at distance. Locking out auto you could run it as a DMR with its accuracy. As all my RIFS they are built to the highest standards with the best quality parts and meticulously maintaining without the intention on selling them. Occasionally I do and this is one of those occasions.
Additional pictures to be uploaded over the weekend.
Any questions drop me a message
https://www.firesupport.uk/angry-gun-ks-3-marui-m4-gbb-mws-conversion-kit-dx-ver.html
£1,580.06
The conversion kit designed to replicate the Knights Armament Company (KAC) KS-3 / SR-16 rifle platform for Tokyo Marui MWS GBB. Tokyo Marui AR / M4 MWS GBB series. CNC 6061-T6 aluminum upper and lower receivers with a Cerakote Magpul Flat Dark Earth (FDE) finish and Sniper Grey accents, paired with CNC steel internal/external controls.
10.5-inch outer barrel, 11.5-inch URX6 M-LOK handguard, and a total net weight of roughly 2,440g.
- Deluxe Edition Kit Contents:
- QDC/MCQ-PRT dummy suppressor
- QDC 3-prong flash hider (14mm CCW)
- Genuine Magpul Carbine stock and MIAD grip in FDE
- CNC steel MWS trigger set
- Ambidextrous charging handle, safety selector, bolt catch, and steel small parts (forward assist, dust cover, mag catch)
- Tokyo Marui MWS Spec. 250mm Inner Barrel - 6.01mm bore 380mm custom EDGI - EBOG DESIGN
- Tokyo Marui MWS Spec. Hop-Up Bucking x 65degree
- Tokyo Marui MWS Spec. Hop-Up Chamber x - DYTAC CNC Aluminium Hopup chamber adjuster.
- Tokyo Marui MWS Spec. Bolt Carrier Group with Nozzle - Monolithic steel bolt carrier (Gen2 MPA Nozzle and 150% nozzle return spring)
- Tokyo Marui MWS Spec. Buffer Spring -Angry gun 110%, 130% & 150% buffer springs
- Tokyo Marui MWS GBB Magazine - Guns modify evo v3 magazines
Details part list.
- KS3 kit
- AMG Vortex LPVO and Arco Red-dot.
- 8x Guns modify evo v3 magazines all leak free with upgraded seals valves and mag grips.
- NGAL (IR used with Nods) & Torch
- 6.01mm bore 380mm custom EDGI - EBOG DESIGN
- 110% buffer spring.
- 1 x High speed recoil buffer, 1x standard recoil buffer & 1 Reenforced buffer
- MONOLITHIC STEEL BOLT CARRIER SERIES (WITH GEN2 MPA NOZZLE & 150% nozzle return spring)
- Magpul ms4 gen2 sling with sling points
- FDE Front grip
- Stand alone FDE Red-dot
- Optic glass protector
- Mag speed loading adaptors
- Hard case with shadow foam cutout.
- All Cerakoted.
- Barrel removal tool
- 2 additional bolts with them setup for specific conditions saving the need to fine tune at a venue. One setup for HPA the other black gas for colder days.
- 130% and 150% buffer springs
- Various length inner barrels as the current setup extends to the just shy of the suppressors end.
- HPA setup MES adaptor, 2 bottles, mags, reg & hose. See my other listing.
Had this up against a DCA & VFC KS1 and this out performs both by a marked amount. Genuine sale having purchased a DAS GBLS and keeping two high end RIFS that have an almost identical footprint makes no sense so unfortunately the KS3 has to go.
Has a few marks from use but are all cosmetic and could be covered.
Will be disappointed to see it go but was built to be used and is a waste as wall art.
£1600.00 no offers. Collection preferred due to price and given what it is.
I understand this is obviously expensive and it’s not for everyone, knowing such a purchased is limited to a small pool. Even at £1600.00 you’re making a huge saving whilst also getting a RIF excels in both CQB and at distance. Locking out auto you could run it as a DMR with its accuracy. As all my RIFS they are built to the highest standards with the best quality parts and meticulously maintaining without the intention on selling them. Occasionally I do and this is one of those occasions.
Additional pictures to be uploaded over the weekend.
Any questions drop me a message
