-
IMG_8545.webp -
IMG_8546.webp -
IMG_8547.webp -
IMG_8548.webp -
IMG_8549.webp -
IMG_8550.webp -
IMG_8551.webp -
IMG_8909.webp
- Condition
- Used
This is a JG BAR-10, a TM VSR clone converted to use HPA.
The VSR is based on a Jing Gong BAR10 G-Spec. The rubberised stock has perished, so I have stripped it, sprayed it black, and given it 3 layers of spray lacquer.
This is an aborted project due to leaving the sport/hobby, hence having one of everything / some duplication for upgrade parts as I was yet to find the proper configuration. Some body screws were lost and replaced with stainless steel.
Note that the HPA tanks certification has lapsed but were both holding air under pressure in storage.
Hopup
Action Army VSR 10 Hopup Chamber
Maple Leaf Autobot Buckings - 50, 60, 70 (TBC)
Variety of hopup nubs (TBC)
Maple Leaf VSR Aluminium BB Stopper
Barrels
Maple Leaf 550mm Crazy Jet Inner Barrel for VSR-10 / FN-SPR / AS-01
TNT Studio TNT 428mm VSR Barrel
Action Army GSPEC VSR10 Inner barrel Spacer set
HPA
Wolverine Wolverine BOLT M JG BAR10 SNIPER RIFLE CONVERSION KIT
Balystik HPR800C Regulator V3 High Pressure - Note: Missing regulator adjustment key, available for £4 online
Tippman Tippmann 13/3000 Aluminium HPA Tank x 2
1 Deep Coffee + 1 Black HPA Lines - 95cm each
Externals / magazines
Goetland 3-9x40 variable scope inc mounts
Separate raised scope rings (For some reason)
Maple Leaf Maple Leaf VSR 30 Round Magazine x 5
Maple Leaf VSR Enlarged Magazine Catch Set
Uncle Mike's QD Super Rifle Swivels
FMA Professional Sling (Coyote)
STALKER STALKER Trigger Guard Pillar for Marui VSR-10 and Clones (Note - currently not fitted)
Silencer adapter - Note centre is drilled out to allow longer barrel fitted within silencer/suppressor
Silencer / suppressor - L 185mm D 38mm
Hard carry case - 122cm * 24cm * 12cm
Stock spares included
Spring
Cylinder
Hop chamber / rubber / etc
Barrel
Stock spares MISSING (Maybe)
Original barrel end - I don't think I have that, but it may be in some stash of parts that will be in the carry case
Total weight of the hard carry case with all parts is ~8kg
I went through all the invoices and grimaced at the amount I sunk into this and never got it properly skirmishable for me.
For all this, I'd look for £250 collected. Parcel Force postage is £22.70 on date of posting ad.
A friendly note: I may not respond quickly to messages (See how my verification photo is in a different context? That's because I'm lazy with posting this ad. Enjoy my manta ray socks.) Patience is a virtue. I will endeavour to get back to serious enquiries / firm offers, with a heavy bias for cash on collection offers. Otherwise, I accept PayPal with the buyer covering fees.
The VSR is based on a Jing Gong BAR10 G-Spec. The rubberised stock has perished, so I have stripped it, sprayed it black, and given it 3 layers of spray lacquer.
This is an aborted project due to leaving the sport/hobby, hence having one of everything / some duplication for upgrade parts as I was yet to find the proper configuration. Some body screws were lost and replaced with stainless steel.
Note that the HPA tanks certification has lapsed but were both holding air under pressure in storage.
Hopup
Action Army VSR 10 Hopup Chamber
Maple Leaf Autobot Buckings - 50, 60, 70 (TBC)
Variety of hopup nubs (TBC)
Maple Leaf VSR Aluminium BB Stopper
Barrels
Maple Leaf 550mm Crazy Jet Inner Barrel for VSR-10 / FN-SPR / AS-01
TNT Studio TNT 428mm VSR Barrel
Action Army GSPEC VSR10 Inner barrel Spacer set
HPA
Wolverine Wolverine BOLT M JG BAR10 SNIPER RIFLE CONVERSION KIT
Balystik HPR800C Regulator V3 High Pressure - Note: Missing regulator adjustment key, available for £4 online
Tippman Tippmann 13/3000 Aluminium HPA Tank x 2
1 Deep Coffee + 1 Black HPA Lines - 95cm each
Externals / magazines
Goetland 3-9x40 variable scope inc mounts
Separate raised scope rings (For some reason)
Maple Leaf Maple Leaf VSR 30 Round Magazine x 5
Maple Leaf VSR Enlarged Magazine Catch Set
Uncle Mike's QD Super Rifle Swivels
FMA Professional Sling (Coyote)
STALKER STALKER Trigger Guard Pillar for Marui VSR-10 and Clones (Note - currently not fitted)
Silencer adapter - Note centre is drilled out to allow longer barrel fitted within silencer/suppressor
Silencer / suppressor - L 185mm D 38mm
Hard carry case - 122cm * 24cm * 12cm
Stock spares included
Spring
Cylinder
Hop chamber / rubber / etc
Barrel
Stock spares MISSING (Maybe)
Original barrel end - I don't think I have that, but it may be in some stash of parts that will be in the carry case
Total weight of the hard carry case with all parts is ~8kg
I went through all the invoices and grimaced at the amount I sunk into this and never got it properly skirmishable for me.
For all this, I'd look for £250 collected. Parcel Force postage is £22.70 on date of posting ad.
A friendly note: I may not respond quickly to messages (See how my verification photo is in a different context? That's because I'm lazy with posting this ad. Enjoy my manta ray socks.) Patience is a virtue. I will endeavour to get back to serious enquiries / firm offers, with a heavy bias for cash on collection offers. Otherwise, I accept PayPal with the buyer covering fees.
