We G17 gas nozzle

[Kevster755]

Hi all,

I bought a WE 17 Gen 5 in December, came to buy a couple of extra mags and ran into an issue where my pistol needs a square nozzle mag and the “compatible” one I bought has a rectangular nozzle and therefore doesn’t seal/perform. Tried to resolve the issue with retailer but can’t seem to find a mag that has the right nozzle. Any help would be appreciated.

*picture shows the magnitude got with pistol on right and new one on left

View attachment 88417

 

[Guest]

Is your WE optic ready? As they have a different gas nozzle to standard

 

[Kevster755]

Thanks for the fast reply! Yes it is optic ready, is it different because of the added weight to the top slide then? Any idea what I need to search for magazine wise?

 

[Guest]

Thanks for the fast reply! Yes it is optic ready, is it different because of the added weight to the top slide then? Any idea what I need to search for magazine wise?

No, WE have changed the design to make room for the flattened nozzle.

You need to search for the latest WE design, No idea what they call it though

 

[JimFromHorsham]

You need the “WE MOS Magazine “ 

as an example 

https://www.airsoftworld.net/we-airsoft-galaxy-spare-magazine.html
 

 

[Floperator]

As an aside, is this the only thing stopping you using normal glock mags in a galaxy g-series? 

Got an extended glock mag sitting there doing nothing and could be running it in the galaxy if i can get hold of those seals.

 

[JimFromHorsham]

As an aside, is this the only thing stopping you using normal glock mags in a galaxy g-series? 

Got an extended glock mag sitting there doing nothing and could be running it in the galaxy if i can get hold of those seals.

this gas router is all you need I believe  
https://www.kyairsoft.com/magazine-bbs/we-magazine/we-gbbp-magazine/g-series/aw-custom-vx7-vx9-rmr-slide-gase-magazine-rubber-gas-route.html

 

[Guest]

this gas router is all you need I believe  
https://www.kyairsoft.com/magazine-bbs/we-magazine/we-gbbp-magazine/g-series/aw-custom-vx7-vx9-rmr-slide-gase-magazine-rubber-gas-route.html

Feed lips different as well to fit the router into

 

[JimFromHorsham]

Feed lips different as well to fit the router into

ah I wasn’t aware but then again I’ve never had any apart or needed to swap bits over , 

for reference , 

galaxy  , Gen5 MOS , Gen5 

View attachment 88470View attachment 88471View attachment 88472View attachment 88473

 

[Floperator]

Might give it a try anyway, it might still feed and it's worth a crack for £3.50. I'll report back whether it was successful or not.

 

[JimFromHorsham]

Might give it a try anyway, it might still feed and it's worth a crack for £3.50. I'll report back whether it was successful or not.

you can see the tops of the magswhere the router exits is different , a little file might help . As you say though could be worth a try for a few quid