Pewpewpetie
Members
- Sep 2, 2019
- 193
- 3
- Thread starter
- #21
V3 Gb Selector Issue
- Thread starter Pewpewpetie
- Start date
Adolf Hamster
Supporters
- Feb 1, 2018
- 7,085
- 2,326
only other interface left then is to see if the col has enough movement to lift the trolley up and over the trigger.
it looks like it's a decent amount, but the devil's in the details.
it looks like it's a decent amount, but the devil's in the details.
Pewpewpetie
Members
- Sep 2, 2019
- 193
- 3
- Thread starter
- #23
Yes it does. Really baffling me now
When I put sector gear and COL in with trigger and close the shell, the trigger unit doesn't touch the Col
I have figured it out, trolley is broken. Looks like a piece hase snapped off of the side
View attachment 73514
Adolf Hamster
Supporters
- Feb 1, 2018
- 7,085
- 2,326
if i have the orientation of that part right in my head then that's exactly the bit it'd be engaging.
Pewpewpetie
Members
- Sep 2, 2019
- 193
- 3
- Thread starter
- #25
Pewpewpetie
Members
- Sep 2, 2019
- 193
- 3
- Thread starter
- #26
Hi again sorry to bother you but I had to change out my selector gear for another 16:1 . Problem is is that this sector hits on the back of the trigger. Aren't all sectors the same size. I had to swap previous as its centre post was too tall and couldn't shim
View attachment 73556
Last edited by a moderator:
Adolf Hamster
Supporters
- Feb 1, 2018
- 7,085
- 2,326
welcome to the fun side of "compatible-ish"
sadly all airsoft parts can be slightly different sizes, doesn't take much to cause something like this.
worth checking it's not pushing up on the piston too.
Similar threads
