Ok, so I have a few guns I dont use and I dont really want to sell my SPR and since the closure of Mall I have been playing outdoors a lot. However, I find my play style of being a sneaky feck with my Evo not as effective in some of the sites especially (shock horror) when its more open.
I had a play with someones DMR and was very happy with the range of it and it got me thinking!!
So I basically want to work out if its:
1) worth attempting to turn my Krytac SPR into a DMR (talking about locked to semi, maximum range and accuracy available and as close to a consistent 450fps as possible)
2) achievable to change out parts myself and work through bit by bit or sending it off to a tech somewhere (bare in mind I have almost 0% experience on theinside of a RIF, but am willing to learn and try it myself)
3) not worth it at all and better off selling it and putting the money into something stock
I just wanted thoughts on if it was possible, likely to have the desired results and what sort of stuff I would need/buy to do what I want, I have no set budget but obviously want to keep it reasonable, no gold plated gubbinz just decent quality parts which will do what I need. Also thinking of it as a project so happy to change out bits slowly but also happy to send it to someone who knows what they are doing if someone more educated than me says its going to be a ballache!
Not looking to have my hand held and very happy to research but I know from experience there will be many answers worth a read from peoples experience on here!
*** TL-DR Version
Is it realistic/possible/worth turning an (almost stock) Krytac SPR into a 450fps locked on semi, fast response, accurate, long range DMR?
I had a play with someones DMR and was very happy with the range of it and it got me thinking!!
So I basically want to work out if its:
1) worth attempting to turn my Krytac SPR into a DMR (talking about locked to semi, maximum range and accuracy available and as close to a consistent 450fps as possible)
2) achievable to change out parts myself and work through bit by bit or sending it off to a tech somewhere (bare in mind I have almost 0% experience on theinside of a RIF, but am willing to learn and try it myself)
3) not worth it at all and better off selling it and putting the money into something stock
I just wanted thoughts on if it was possible, likely to have the desired results and what sort of stuff I would need/buy to do what I want, I have no set budget but obviously want to keep it reasonable, no gold plated gubbinz just decent quality parts which will do what I need. Also thinking of it as a project so happy to change out bits slowly but also happy to send it to someone who knows what they are doing if someone more educated than me says its going to be a ballache!
Not looking to have my hand held and very happy to research but I know from experience there will be many answers worth a read from peoples experience on here!
*** TL-DR Version
Is it realistic/possible/worth turning an (almost stock) Krytac SPR into a 450fps locked on semi, fast response, accurate, long range DMR?
Last edited by a moderator:
