Recommendations for mounting torch on Cybergun P90 without rail/picatinny

[ashburns54]

Afternoon chaps 

Can anyone recommend how I can go about adding a torch/flashlight attachment to the side of my Cybergun P90 that doesn't have a rail/picatinny. There's a handy picatinny rail on the other side which I'm going to use for a laser but I'm trying my best to replicate the Stargate SG-1 P90  and I'd really like to add a torch/flashlight to the rail-less side if possible. Any suggestions welcome.. best I can come up with is MacGyvrering it with zip ties and duct tape. 

thanks really appreciate it, absolute noob/rental here forgive me ?

View attachment 76798

 

[Tackle]

Another section of rail ?, surely the simplest answer & available cheaply from eBay etc

 

[ashburns54]

Hi thanks for the reply

But how can I attach the rail to the p90 ?

 

[BigStew]

Hi thanks for the reply

But how can I attach the rail to the p90 ?

Look at how the existing rail is mounted. The mounting points should be replicated on the other side. If not modification is required.

 

[ashburns54]

Look at how the existing rail is mounted. The mounting points should be replicated on the other side. If not modification is required.

Yeah they're not replicated on the other side. I'm thinking extra strong gorrila glue might be the way forward.. with zip ties for extra support.

 

[BigStew]

Yeah they're not replicated on the other side. I'm thinking extra strong gorrila glue might be the way forward.. with zip ties for extra support.

I would look to drill holes in the upper receiver if you want to attach the rail. Or just skip the rail and zip tie the torch directly.

 

[Lozart]

. best I can come up with is MacGyvrering it with zip ties and duct tape. 

View attachment 76798

Please tell me that was deliberate!

 

[Sneaky]

Gaffer tape?

 

[ashburns54]

Please tell me that was deliberate!

Yeah ?

 

[Lozart]

Yeah ?