Mk23 mag falling out
- Thread starter Huxley
- Start date
Yes, nice and easy. 2 strips of elastic.
Make an Underpants shape with them, make the bit that goes around the grip tight, and the bit under the mag a little looser.
Changing mags is a little slower, but you don’t lose mags, and they don’t tend to get loose either.
Make an Underpants shape with them, make the bit that goes around the grip tight, and the bit under the mag a little looser.
Changing mags is a little slower, but you don’t lose mags, and they don’t tend to get loose either.
- Thread starter
- #4
Found a fix for mk23 clones.
Double tap designs have a mag retention device, but they don't sell it on site.
After a few words he's printing a couple, how's that for service.
View attachment 38210
Double tap designs have a mag retention device, but they don't sell it on site.
After a few words he's printing a couple, how's that for service.
View attachment 38210
Windyedges
Members
- Dec 29, 2019
- 3
- 0
can we have more pix on this to see how its done maybe lol 
what I did last night and it worked was drill a small hole to the front of the grip, tie a knote in some elastic that sits inside the mag well pulled through the hole over the mag and tied into the hole at the back of the pistol grip, again slows loading and reloading BUT didnt loose a mag today, I have even filed a little groove in the front of the mag to keep the elastic from slipping round
what I did last night and it worked was drill a small hole to the front of the grip, tie a knote in some elastic that sits inside the mag well pulled through the hole over the mag and tied into the hole at the back of the pistol grip, again slows loading and reloading BUT didnt loose a mag today, I have even filed a little groove in the front of the mag to keep the elastic from slipping round
