• 2FA temporarily disabled, emails not working

    Two factor authentication (for most of you 'email a code') has been temporarily disabled while we figure out why emails are not being received by large numbers of users. Emails are not sending site-wide. Please continue to use AF-UK as normal but note that you may be asked to log back in once this is re-enabled.

Mancraft in G36 feed issues

Szelwa

Members
Joined
Apr 1, 2024
Messages
22
Reaction score
3
Hi all. 
I hope someone will be able to share some ideas how to fix my problem. 
I just finished fitting mancraft v3 into the Specna Arms G36 (same as ares). Took me some time with dremel to make it fit into gearbox as original mancraft v3 gearbox would not fit at all in the gun. 
Trouble I have is that rif is feeding 2 bbs at the time. I adjusted and tested length of the original nozzle than swap for the 24.5mm one dedicated for G36 for better air seal. 
Swapped hop up as well as tested 2 different mags hi cap and low cap TM. 
To no change. 
Worth to mention I had same problem on this one while it was aeg.  

 
Back
Top