-
Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.
The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here
If you have any issues please post about them in the Forum Feedback thread: Go Here
Krytac Build/Setup Pictures
- Thread starter Max2000
- Start date
Baz JJ
Members
- May 23, 2013
- 2,349
- 502
Hef Legend
Members
- Sep 6, 2014
- 910
- 301
Come Wednesday I'll put some pictures of my PDW up 
ImTriggerHappy
Supporters
- Feb 25, 2015
- 5,374
- 2,228
Because AR15's are so exciting and different ☺
Hef Legend
Members
- Sep 6, 2014
- 910
- 301
ImTriggerHappy
Supporters
- Feb 25, 2015
- 5,374
- 2,228
Its Monday
Last edited by a moderator:
P
PT247
Guest
ImTriggerHappy
Supporters
- Feb 25, 2015
- 5,374
- 2,228
Thats a nice gun you have attached to your scope ?
P
PT247
Guest
haha thanks, that scope is now on my VSR and although I utterly love the DMR I actually prefer the PDW which although was modded is now in standard form as the Prommy barrel pushed it over 350fps (standard is roughly 345fps) I have a Silverback SRS 16" barrel end cap to negate the need for a flash hider and it shoots so nice. I am tempted to try the 30k motor in it as I mainly run a 7.4v LiPo so the double feed issues folk have complained about (which I have never suffered) shouldn't be an issue, I can get an 11.1v in the stock but it is so tight a fit it is an arse to bother with.
When running the PDW as a primary I normally fit a magnified scope as it is plenty good enough to warrant it but when using it as a sniper secondary I run it as above.
When running the PDW as a primary I normally fit a magnified scope as it is plenty good enough to warrant it but when using it as a sniper secondary I run it as above.
Last edited:
ImTriggerHappy
Supporters
- Feb 25, 2015
- 5,374
- 2,228
I prefer the PDW I bought a CRB and regretted it straight away, not that I had it long RIP.
If it wasn't for the fact that I find the Ar15 platform boring I would be tempted by the PDW when I next get a new gun.
The 30k does run well with a 7.4v but if you really want a good motor.
http://www.evike.com/products/51834/
If it wasn't for the fact that I find the Ar15 platform boring I would be tempted by the PDW when I next get a new gun.
The 30k does run well with a 7.4v but if you really want a good motor.
http://www.evike.com/products/51834/
P
PT247
Guest
I already have the 30k in my DMR though so could swap it out for ze gigglez
The (at least my) PDW is the bestest best out the box AEG I have EVER owned no lies. I have concerns now they have built a solid rep that their new range of guns will be well below par WRT the costs. I would not expect their non-Trident range to be anywhere near as good as the Mk1 Tridents and possibly the Mk2 Tridents may be less good too.... but I only say that as I am a cynic not because I know anything so don't take my word on that.
P
PT247
Guest
hahahhaaa just clicked the link.... 45k.... hahahahahaha that would be obscene on an 11.1v LiPo and utterly wouldn't work on a sub 350 AEG
P
PT247
Guest
I actually wish I had bought the SDP when it was a proper Krytac, it now falls under the lower spec guns so may not be anywhere as good as the original Tridents.
ImTriggerHappy
Supporters
- Feb 25, 2015
- 5,374
- 2,228
Struggle to even use with a high c 7.4v lipo. I have one and can only use a 9.6v nimh. Pulls a 150 spring like its a rubber band.hahahhaaa just clicked the link.... 45k.... hahahahahaha that would be obscene on an 11.1v LiPo and utterly wouldn't work on a sub 350 AEG
ImTriggerHappy
Supporters
- Feb 25, 2015
- 5,374
- 2,228
I think the MK2 will be a step up from what I have read. Wont get one though as Krytac have pissed me off a bit by seeming to not care enough about the UK market.I already have the 30k in my DMR though so could swap it out for ze gigglez
The (at least my) PDW is the bestest best out the box AEG I have EVER owned no lies. I have concerns now they have built a solid rep that their new range of guns will be well below par WRT the costs. I would not expect their non-Trident range to be anywhere near as good as the Mk1 Tridents and possibly the Mk2 Tridents may be less good too.... but I only say that as I am a cynic not because I know anything so don't take my word on that.
Lozart
Supporters
- Jun 24, 2013
- 8,493
- 4,942
P
PT247
Guest
I would up until recently have agreed except I have spent several evenings chatting on Farcebook with a Krytac person who is also ex KWA chatting about marketing etc. They are selling every gun they put on a shelf in the UK so our lack of marketing as we see it is their version of not creating more demand than they can keep up with. Also with the KWA RM4 spares issues learnt they are ensuring that they do have the spares for each Krytac sold. I was miffed to have had a 20k motor in my guns but that was due to UK retailers mis marketing them not Krytac. BTW I am in no way at all associated with Krytac, I just like a good product when I see it.
ImTriggerHappy
Supporters
- Feb 25, 2015
- 5,374
- 2,228
Are you trying to say something? lol
Sitting Duck
Supporters
- May 11, 2014
- 4,894
- 1,735
Well to be honest there is still room for improvement like most things.....
possible 1 or 2 teeth Shortstroking on smaller UK guns to run with 30k motor
easier spring change at back of box whilst still in gun - other makes have done this
that f*cking JBBG M4 pistol grip ffs
reduced trigger pull
rather see the above than a ETU 3rnd burst malarky in next line up of new guns
(hey I'm old school but kudos to Krytac - demonstrating how it should be done, others need to take note/follow)
possible 1 or 2 teeth Shortstroking on smaller UK guns to run with 30k motor
easier spring change at back of box whilst still in gun - other makes have done this
that f*cking JBBG M4 pistol grip ffs
reduced trigger pull
rather see the above than a ETU 3rnd burst malarky in next line up of new guns
(hey I'm old school but kudos to Krytac - demonstrating how it should be done, others need to take note/follow)
Similar threads
