JG RPK aftermarket/replacement stock

[Deleted member 27209]

Does anyone know who makes a compatible wood or polymer stock that I can be mounted onto a JG RPK74? 

Mine has decided to crack slightly around the metal tang where it bolts onto the rifle which i am going to try and fill with super glue and clamp together but am thinking of my plans if the gluing plan fails....

View attachment 102684

 

[Sniper780]

You could try the lct rpk wood stock set, it just depends if your metal fitting are the same as an lct rpk.

 

[Deleted member 27209]

I have reattached it but all i have is a tab at the top for the bolt to go in and then at the bottom a small box extension that the wires run through

View attachment 102699

 

[Sniper780]

I have just measured my lct rpk stock, it looks almost the exact same as tang fitment set up as yours 

The dimensions for the square opening are width: 20.88mm and height:15.43mm.

The lct rpk rear stock it made of laminated wood so it is modifiable. 

 

[Deleted member 27209]

Cheers mate! I have managed to glue the cracks and used a clamp to keep pressure on the stock while it dried (my missus bought some superglue that was like water so it soaked into the wood perfectly)but i am still going to find a new stock and handguard set...as i imagine it will fail at some point! Although it fits alot tighter now which i am happy with as it had slight left and right movement!!  

View attachment 102712