Ranger
Members
- Jul 22, 2009
- 155
- 6
Guys,
I really lik TM's NGRS AEG's for their accuracy and build quality, but I am really not a big fan of the lucklaster recoil. Hence I did a lot of research online on how to disable the recoil but no luck. So I decided to do it myself and it is surprisingly easy and I thought I share the method with you! By disabling the recoil you get a much more effcient and quieter AEG with much better durability. People will say what's the point of removing the main selling point of the AEG, but this thread is just offering people a choice should they decided to go recoiless!
First of all, remove the stock
Secondly, buy a 3 pins spanner from Eagle 6 (link here https://eagle6.co.uk/product/laylax-buffer-tube-opener-tool-for-marui-hk416d) , or do what I did, use JB weld to make a 3 pins spanner using 3 bolt (and save yourself 30 quid).
Thirdly, open the end cap of the stock tube by using the 3 pin spanner turning anti-clockwise.
Finally, remove the recoil weight and the spring behind it, put the spring to the front of the recoil weight and insert the recoil weight with the spring in front back to the stock tube. Close and fasten the end cap. Job done!
Result, faster cycle time, less wear and tear and quiet AEG. I am very happy!
All the best boys.
View attachment 122783
View attachment 122784
View attachment 122786
I really lik TM's NGRS AEG's for their accuracy and build quality, but I am really not a big fan of the lucklaster recoil. Hence I did a lot of research online on how to disable the recoil but no luck. So I decided to do it myself and it is surprisingly easy and I thought I share the method with you! By disabling the recoil you get a much more effcient and quieter AEG with much better durability. People will say what's the point of removing the main selling point of the AEG, but this thread is just offering people a choice should they decided to go recoiless!
First of all, remove the stock
Secondly, buy a 3 pins spanner from Eagle 6 (link here https://eagle6.co.uk/product/laylax-buffer-tube-opener-tool-for-marui-hk416d) , or do what I did, use JB weld to make a 3 pins spanner using 3 bolt (and save yourself 30 quid).
Thirdly, open the end cap of the stock tube by using the 3 pin spanner turning anti-clockwise.
Finally, remove the recoil weight and the spring behind it, put the spring to the front of the recoil weight and insert the recoil weight with the spring in front back to the stock tube. Close and fasten the end cap. Job done!
Result, faster cycle time, less wear and tear and quiet AEG. I am very happy!
All the best boys.
View attachment 122783
View attachment 122784
View attachment 122786
