-
Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.
The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here
If you have any issues please post about them in the Forum Feedback thread: Go Here
home made box mag tracer unit
- Thread starter reiver
- Start date
- Oct 20, 2012
- 5,105
- 1,678
I'm taking a look at my MAG one to see if I can find a way to mount an LED inside the part that attaches the mag to the magwell (rather than the box itself). I feel if I'm just shining light on the ones in the box then they're probably going to have a good amount of time to lose that extra florescence given to them before I manage to fire them.
Also it means I won't have a string of glowing green beads hanging from the side of my gun during night games, but getting the battery in there may be a fair bit of work. Maybe a couple of AAAs.
Also it means I won't have a string of glowing green beads hanging from the side of my gun during night games, but getting the battery in there may be a fair bit of work. Maybe a couple of AAAs.
Last edited by a moderator:
- Oct 20, 2012
- 5,105
- 1,678
Bit of a bump but I got up far too early this morning and did this - had to wait until not to give it a proper test. The results are good but the finish isn't. It lights up BBs very well:
It shines on maybe the 3rd or 4th BB from the hop chamber, so they stay pretty well lit.
It shines on maybe the 3rd or 4th BB from the hop chamber, so they stay pretty well lit.
Last edited by a moderator:
Similar threads
