G&G outer barrel (stubby) acquisition.

[rosscoc87]

Does anyone know were I can one of these in the UK....

http://www.airsoftoutletnw.com/g-g-gr16-cqb-front-sight-and-outer-barrel-assembly

The idea is to be able to convert my M4 back & forth between standard & stubby to save me buying a new gun. I will also need to change my inner barrel as mine comes right to the end of my standard 14" barrel so if anyone could recommend a good precision barrel that wouldn't brake the bank that would be great!

Cheers

Ross

 

[Mr Monkey Nuts]

I bought all my parts from taiwangun, I will try to find the links later but it basically consisted of:

10 + 4 extension

http://www.taiwangun.com/en/outer-barrel-m15-m4-cqb-p-j?from=listing&campaign-id=19

Front sight post

http://www.taiwangun.com/en/front-folding-sight-for-m4-m16-series-acm?from=listing&campaign-id=19

250mm tbb

Http://www.taiwangun.com/en/precise-barrel-250mm-6-03mm-to-p-90-g36c-src?from=listing&campaign-id=19

It took a bit of time to strip the from end down as the g&g it's a slightly different barrel assembly to a lot of brands, but there are videos on you tube.

Don't forget the front sight is fixed to the original barrel so that will need replacing to hold the hand guard in place.

The barrel came branded as a SHS so pretty good brand and it was already nicely polished.

Saying that losing the extra few inches gave me very little gains in performance or practicality.

 

[rosscoc87]

They look great cheers dude! How did the inner barrel perform?