-
Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.
The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here
If you have any issues please post about them in the Forum Feedback thread: Go Here
G&G GR14 RIS Mount
- Thread starter Spike6511
- Start date
yes.
There should be a threaded screw hole on the left hand side of the gun. Just above the mag well.
You can fit the standard M14 rail adapter into it.
Amazon have them for under £20. But If you look about you might find one cheaper.
https://www.amazon.co.uk/ASG-AIRSOFT-SCOPE-MOUNT-METAL/dp/B00FQLOMXY
If you mean a full front end RIS then G&G actually used to make one for the Gr14, not sure how well it fits on the wood model, In essence it looks identical to the Cyma M14 RIS that is available for about £45.
https://www.airsoftgi.com/product/GG-RAS-Unit-for-GG-GR14-3489/
https://www.amazon.co.uk/CYMA-Rail-Handguard-Marui-Airsoft/dp/B01N8TCJH2
There should be a threaded screw hole on the left hand side of the gun. Just above the mag well.
You can fit the standard M14 rail adapter into it.
Amazon have them for under £20. But If you look about you might find one cheaper.
https://www.amazon.co.uk/ASG-AIRSOFT-SCOPE-MOUNT-METAL/dp/B00FQLOMXY
If you mean a full front end RIS then G&G actually used to make one for the Gr14, not sure how well it fits on the wood model, In essence it looks identical to the Cyma M14 RIS that is available for about £45.
https://www.airsoftgi.com/product/GG-RAS-Unit-for-GG-GR14-3489/
https://www.amazon.co.uk/CYMA-Rail-Handguard-Marui-Airsoft/dp/B01N8TCJH2
Last edited by a moderator:
- Thread starter
- #3
yes.
There should be a threaded screw hole on the left hand side of the gun. Just above the mag well.
You can fit the standard M14 rail adapter into it.
Amazon have them for under £20. But If you look about you might find one cheaper.
https://www.amazon.co.uk/ASG-AIRSOFT-SCOPE-MOUNT-METAL/dp/B00FQLOMXY
If you mean a full front end RIS then G&G actually used to make one for the Gr14, not sure how well it fits on the wood model, In essence it looks identical to the Cyma M14 RIS that is available for about £45.
https://www.airsoftgi.com/product/GG-RAS-Unit-for-GG-GR14-3489/
https://www.amazon.co.uk/CYMA-Rail-Handguard-Marui-Airsoft/dp/B01N8TCJH2
Will a CYMA one fit.
No idea, but at £45 and with a dremmel and some aluminium black you can make anything that gets in the way vanish.
Or you could just be careful when you try to install it so it can go back to the store if needed. At £45 I'd risk it because the G&G one looks to be the same.
I've had older G&G discontinued parts from other companies before, Recently I got some sights for a G&G GR300 and G&G don't make them any more, but the A&K ones are identical to the G&G ones. I can't see G&G making a M14 and changing the layout significantly. You can trawl the forums for an answer, but you might never find one.
Or you could just be careful when you try to install it so it can go back to the store if needed. At £45 I'd risk it because the G&G one looks to be the same.
I've had older G&G discontinued parts from other companies before, Recently I got some sights for a G&G GR300 and G&G don't make them any more, but the A&K ones are identical to the G&G ones. I can't see G&G making a M14 and changing the layout significantly. You can trawl the forums for an answer, but you might never find one.
Last edited by a moderator:
Similar threads
