G&G ETU
- Thread starter Hangtight
- Start date
Lozart
Supporters
- Jun 24, 2013
- 8,500
- 4,947
Spanish site, but it appears it is an available part https://www.tacticalcenter.es/GG-Trigger-Switch-Only-ETU-GearBox-V2
Lozart
Supporters
- Jun 24, 2013
- 8,500
- 4,947
http://www.bullseyecountrysport.co.uk/gg-airsoft-replacement-etu-mosfet-power-control-unit-cm16-sr-04-6mm-bbs-17506-p.asp
Might be worth buying the whole lot here for £23 rather than that £40 from patrol base.
I know it’s out of stock, but they’ll be back in shortly.
Might be worth buying the whole lot here for £23 rather than that £40 from patrol base.
I know it’s out of stock, but they’ll be back in shortly.
Sitting Duck
Supporters
- May 11, 2014
- 4,894
- 1,735
Do not quote me on this.....
I might still have the old FFR A2 switch - it was the mosfet unit that blew
4 wires to 3 switches - trigger, col & one at back detecting semi/auto selector plate
it feeds one common wire which then feeds back a signal or closed circuit
Telling the ETU mosfet what switch/circuit is open/closed etc....
Well I tested with a continuity test meter dooberry 2 reds + 2 black wires
4 wire connector lead red,black,red,black or something like that
yup one supply & 3 return signals
I was trying to see if some other fet like the cheetah or something could work for dead ETU guns
but cheetah is old/OOS and just gave up going back to old school style trigger
Mosfet blew, but afaik the ETU switch and 4 wire loom was ok still
I last saw it about 6 months ago and tbh I'm not sure if I slung in one of many boxes
Or finally decided to chuck it in the bin
Tried to give you as much info as poss, I can look for it over this long weekend perhaps
Only don't hold your breath in case I finally did bin that pile of junk ETU leftovers I had
I might still have the old FFR A2 switch - it was the mosfet unit that blew
4 wires to 3 switches - trigger, col & one at back detecting semi/auto selector plate
it feeds one common wire which then feeds back a signal or closed circuit
Telling the ETU mosfet what switch/circuit is open/closed etc....
Well I tested with a continuity test meter dooberry 2 reds + 2 black wires
4 wire connector lead red,black,red,black or something like that
yup one supply & 3 return signals
I was trying to see if some other fet like the cheetah or something could work for dead ETU guns
but cheetah is old/OOS and just gave up going back to old school style trigger
Mosfet blew, but afaik the ETU switch and 4 wire loom was ok still
I last saw it about 6 months ago and tbh I'm not sure if I slung in one of many boxes
Or finally decided to chuck it in the bin
Tried to give you as much info as poss, I can look for it over this long weekend perhaps
Only don't hold your breath in case I finally did bin that pile of junk ETU leftovers I had
- Thread starter
- #8
If you've got a spare and it turns up then shoot me a PM. Cheers.
The ETU is fine, shame about the actual Mosfet part of it. But there's definitely space in the market for something like the Chimera FCU, but that you can actually get hold of....
The ETU is fine, shame about the actual Mosfet part of it. But there's definitely space in the market for something like the Chimera FCU, but that you can actually get hold of....