Fitting supressor on cyma 701b

[ChrisG]

Sorry if wrong forum.

How do I go about fitting a supressor onto the end? Hopefully someone has one.

I have the right threaded attachment, but theres no thread on the gun? Unless I yank the top off of the end (somehow) and the thread is below ??

 

[DrAlexanderTobacco]

Some barrels will have a thread for attachments on the outside, sometimes it's on the inside of the barrel. Put your finger into the barrel muzzle to have a feel for internal threads.

In future there's a "quick questions and answers" thread which might be better suited for this, it's stickied.

Good luck!

P.S. If the barrel doesn't have any threads I think you could probably get it threaded, you'd need to know the thread dimensions and find someone with a suitable die to cut it.

 

[Monkeywrencher]

should be a cap screwed into the muzzle end of the barrel, to be replaced by ...https://www.patrolbase.co.uk/cyma-cm-701-702-silencer-adaptor-14mm-ccw