• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

Double eagle UTR 45

Looks like a ball-ache to get apart.

Pesky Ambi controls with their associated cogs and tiny pieces....







 
Speedbird_666 said:
Looks like a ball-ache to get apart.

Pesky Ambi controls with their associated cogs and tiny pieces....
Click to expand...


It does look pretty, however I'll take a DE M900 over it due to their structural simplicity and identical internals.

 
Nice review. I've picked one of these up and thankfully the internals are the same great stuff in the M9XX series.

I first thought it was a made up replica by Double Eagle but it turns out it's actually based on a real firearm

http://www.imfdb.org/wiki/LWRC_SMG-45

it's also good to see a whole bunch of rails, screws, a different mag release and the battery adapter in the box as well.

 
mightyjebus said:
I first thought it was a made up replica by Double Eagle but it turns out it's actually based on a real firearm

http://www.imfdb.org/wiki/LWRC_SMG-45
Click to expand...


Yeah I thought the same until I did a bit of research. Still love the gun even though I haven't used it that much though as not been to many games much recently.

I'm going to upgrade my bucking and nub as it struggles to lift anything over .20g

 
My little order from AK2M4 came through the post today (great service as always). New 240mm ZCI barrel paired with a gear parts omega nub and a old ML bucking. To finish off they are inside a new ZCI hop up unit. 

View attachment 95617

Reason I've upgraded the hop up unit in all my DE guys is for 2 reasons;

The first is the arm has a different moulded end and the omega style nub doesn't fit in there properly.

View attachment 95616

Secondly the standard DE hop adjust wheel only has half the adjustment range as the ZCI or similar design (I used a specna arms one for reference).

View attachment 95615

Hopefully now it will lift and fire .30g as well and as far as my other DE guns. 

 
In the market for a new ('not-an-M4') RIF and I keep circling back to this one and it's now on my 'short-list'.

Question is - how is the Falcon ETU at handling 11.1v LiPos out of the box? How has the unit generally held up with use? 

 
Speedbird_666 said:
In the market for a new ('not-an-M4') RIF and I keep circling back to this one and it's now on my 'short-list'.

Question is - how is the Falcon ETU at handling 11.1v LiPos out of the box? How has the unit generally held up with use? 
Click to expand...


I've been running 11.1v Li-Po's and Li-Io's in mine for over a year, and it's been faultless (the same with my DE rifle built to be a DMR, and my sons).

There are some on Reddit who really twist the knife into the Falcon controller and its reliability, however I'm betting (based on what I've read) that they've run them ragged on full auto and you really can get the cheap stock Chaoli motor very hot if you're a numpty / newbie and this is also negatively effecting the controller.

 
Last edited by a moderator:
Fatboy40 said:
I've been running 11.1v Li-Po's and Li-Io's in mine for over a year, and it's been faultless (the same with my DE rifle built to be a DMR, and my sons).

There are some on Reddit who really twist the knife into the Falcon controller and its reliability, however I'm betting (based on what I've read) that they've run them ragged on full auto and you really can get the cheap stock Chaoli motor very hot if you're a numpty / newbie and this is also negatively effecting the controller.
Click to expand...


Nice one - thanks for that info.

 
Just to add I've got 3 DE guns and run them all on 11.1v, never had a problem.

My 904G must be coming up to 2 years old now, abuse full auto now and again, never opened it up to service the gearbox (sounds a little noisy now so might have to), still has the same RPM and FPS/joule it had out the box. 

Also as it uses a V2 gearbox it will accept parts from your M4s

 
Last edited by a moderator:
I've got 1. it looks like something dreamed up by an airsoft company but it's actually a copy of the LWRC SMG 45. internally it uses the same Falcon gearbox as the M9XX series so is pretty rock solid. biggest problem is trying to carry the extra mags as they are about the same length as a P90 mag.

 
First time I used the mp5 mag at the weekend. All fed perfectly with zero issues. 

 
Stevobeavo said:
My little order from AK2M4 came through the post today (great service as always). New 240mm ZCI barrel paired with a gear parts omega nub and a old ML bucking. To finish off they are inside a new ZCI hop up unit. 

View attachment 95617

Reason I've upgraded the hop up unit in all my DE guys is for 2 reasons;

The first is the arm has a different moulded end and the omega style nub doesn't fit in there properly.

View attachment 95616

Secondly the standard DE hop adjust wheel only has half the adjustment range as the ZCI or similar design (I used a specna arms one for reference).

View attachment 95615

Hopefully now it will lift and fire .30g as well and as far as my other DE guns. 
Click to expand...
Hate to revive such an old thread, but how did you get your ZCI plastic hop to play nice? I just got your average macaron/zci plastic today (also from AK2M4 lol) and while I've managed to test perfectly fine and get good results, I can't get anything in when it comes to full assembly. Even with just the two metal rods that guide the UTR branded bolt (with no springs, nor the bolt) it prevents me from getting it in as it's getting stuck on something, even after pushing the hop into place like you mentioned. Did you do some fitment?

 
You must log in or register to reply here.

Similar threads

Punisher3990
Airsoft Tailoring - P90 Accessories
Replies
2
Views
315
Punisher3990
Punisher3990
J
First RIF Opinions?
Replies
11
Views
684
Joesif
J
W
MWS SPR DMR semi build
Replies
3
Views
2K
woody549
W
jzmalexander
Airsoft HMLMG from Rust
Replies
0
Views
5K
jzmalexander
jzmalexander
Punisher3990
Odd issue with Cybergun Perun P90 (Carries on firing for a second or two after releasing trigger on full auto)
Replies
4
Views
235
Punisher3990
Punisher3990
Back
Top