Choosing a rifle - I do not choose well it seems

[sonofsammo]

On Sunday, I fielded three rifles at different times.
I think the time has come for me to admit that I am not fit enough to effectively use my MWS any more.
The rifle, combined with only 5 mags (+1) was just too much for me to carry and keep moving at anything approaching a competitive speed.
My new SVU was great, but weighed too much, so I've sold it.
The Vector was ace, as always, but lacked real range.
For the first time I was at a site that actually had targets had measured ranges - so there was 25m, 35m and 50m.
Up to 35m the Vector was spot on - at 50m, it was getting there - just.
I seem to have nothing that will actually do what I want it to.
Tbf, I think it might be my expectations. I know I can shoot well - I've been into air rifles since I was old enough to hold a gun. My Dad taught me to shoot an old Diana when I was about 7. And my last air rifle was an FX Wildcat. 
So I generally expect to hit what I'm aiming at. But I'm not. And the main issue is range.
To a degree, I'm resolving that with a sniper when it comes.
But I still need something for when I'm not feeling sneaky.
I need something:
Light (turns out my left arm is permanently knackered ? - so it gets fatigued really quickly. In game, this is from both carrying the rifle and manipulating heavy mags. I drop stuff really easily, cos I only have one fully working finger left on my left hand.).
Excellent range
Consistently accurate
Wife has suggested that I should sell all my guns and start from scratch. To be honest, it's not a bad idea, so I'm going to sell some of them, so I have a decent wedge for guns/mags/batteries.
Any suggestions or advice most welcome.

 

[E21A]

CM16 with a decent barrel/hop/rubber setup. It’ll be light, use hi caps to reduce mag changes? 

Wouldnt cost you you much to find out if it suits your needs. 

 

[sonofsammo]

CM16 with a decent barrel/hop/rubber setup. It’ll be light, use hi caps to reduce mag changes? 

Wouldnt cost you you much to find out if it suits your needs. 

Is that a similar level of rif to a nuprol defender pioneer?

 

[E21A]

Is that a similar level of rif to a nuprol defender pioneer?

No, it’s much better. 

 

[Davegolf]

TM Scar recoil shock, 340 FPS, Rhop. Done

 

[sonofsammo]

TM Scar recoil shock, 340 FPS, Rhop. Done

340fps??

How?

 

[EvilMonkee]

340fps??

How?

Upgrade the spring - Fire Support do an add on pack for TM Recoils that includes spring upgrade and lipo battery fitment.  TBH I think most AEGS struggle to reach upto and beyond 50m.  I use 45m as a benchmark for the performance of my guns anything else is a bonus. 

 

[Davegolf]

What I suggested is very light and balanced, the Scar being mostly polymer and thinwall aluminium.

As @EvilMonkee said you can buy upgrade packs from some retailers, but yes a spring upgrade and cylinder/barrel volume match will see you upto 340fps and power heavy weight BBs.

A quality Rhop setup on a TM recoil will see you an effective 65M range. And yes that is measured.

PS @sonofsammo just noticed your comment at the bottom of all your posts!

 

[Asomodai]

Considering your left arm is knackered (And I am biased) I would recommend a light bullpup. Possibly the TM High Cycle AUG? What little weight there is, is at the back of the rifle so your right shoulder and right arm takes the strain, your left arm is just used to hold the foregrip. 

 

[BigStew]

Aug high cycle is a good shout but a TM mp5 high cycle will be lighter than an aug

 

[Asomodai]

Aug high cycle is a good shout but a TM mp5 high cycle will be lighter than an aug

All the weight at the front with the Drum mag

 

[Game Cam]

I would suggest ARP but it is full metal so it's lighter than full length metal guns but not as light as plastic guns of the same size.

As some who shoots alot of Air Rifles and Rifles I know that annoyance from missing easy shots due to range but that's the part of the deal of not having real guns.

I hope the sniper helps more!

(I would recommend a shooting stick for the sniper if your left arm is knackered)

 

[sonofsammo]

I would suggest ARP but it is full metal so it's lighter than full length metal guns but not as light as plastic guns of the same size.

As some who shoots alot of Air Rifles and Rifles I know that annoyance from missing easy shots due to range but that's the part of the deal of not having real guns.

I hope the sniper helps more!

(I would recommend a shooting stick for the sniper if your left arm is knackered)

I've got an ARP9 - but its range is less than the Vector.
Good call on the shooting stick - Cheers, will have a look.

 

[Game Cam]

I've got an ARP9 - but its range is less than the Vector.
Good call on the shooting stick - Cheers, will have a look.

How much do you care about aiming down sights?

Cause you might wana think about a sling.

I can shoot my CA M249 one handed while I'm carrying a objective using a sling - it's off the hip shooting but you can kind of eyeball it on to targets.

But I do know some sites really don't like shooting from the hip while others don't mind if you are looking where you are shooting.

Just another idea.

 

[sonofsammo]

How much do you care about aiming down sights?

Cause you might wana think about a sling.

I can shoot my CA M249 one handed while I'm carrying a objective using a sling - it's off the hip shooting but you can kind of eyeball it on to targets.

But I do know some sites really don't like shooting from the hip while others don't mind if you are looking where you are shooting.

Just another idea.

It depends what I'm shooting with and what I'm shooting at.
If I'm using the arp9 with drum mag, then I don't use sights, I just walk the BBs onto the target.
If it's my MWS, with only 35rds in a mag, then I use a sight..

 

[Prisce]

TM Scar recoil shock, 340 FPS, Rhop. Done

I disagree with this. 

My Tm scar is very heavy for a standard gun. I wouldn’t recommend it.

My first recommendation would be to bin all furniture. It’s not needed and adds too much weight. 

My second recommendation would be get a light m4 with 2-3 hi caps or a drum mag, (firehawk gets my recommendation, my brothers is evil and I can use 1 handed).

You say you have an ARP that isn’t working to your expectations.  Get a Tech to work on it? Depending on how much you want to spend on the gun, and on Ammo would depend on what I’d recommend. Get it to work exactly how you want it.

OR you can do my favourite thing, pistols, upgraded, lots of mags.   

OR speak to @rocketdogbert about his remote mag for a pistol.... I still aim to do this, once life lets me.

 

[Guest]

OR speak to @rocketdogbert about his remote mag for a pistol.... I still aim to do this, once life lets me.

?

 

[sonofsammo]

?

I disagree with this. 

My Tm scar is very heavy for a standard gun. I wouldn’t recommend it.

My first recommendation would be to bin all furniture. It’s not needed and adds too much weight. 

My second recommendation would be get a light m4 with 2-3 hi caps or a drum mag, (firehawk gets my recommendation, my brothers is evil and I can use 1 handed).

You say you have an ARP that isn’t working to your expectations.  Get a Tech to work on it? Depending on how much you want to spend on the gun, and on Ammo would depend on what I’d recommend. Get it to work exactly how you want it.

OR you can do my favourite thing, pistols, upgraded, lots of mags.   

OR speak to @rocketdogbert about his remote mag for a pistol.... I still aim to do this, once life lets me.

I already have... ? 
And have experienced the remote mag, but it wasn't for me. It seems I don't like hpa.

 

[kasaran]

I would have had the svu off ya....

 

[heroshark]

I'd say the best call so far is a light weight good quality shortish m4 with a high cap. Like the CM range although there are other good polymer guns, just can't think of any off the top of my head. Maybe ICS. keep it short, I wouldn't say fire hawk due to the short barrel. Although bang a reasonable length light weight silencer on like the lees precision engineering and a good quality extended inner barrel ,hop and cylinder to match would do the job. Maybe a spring to bump it up to site limit to get the most out of it. Whatever you get a nice barrel and hop work wonders.