ASG Armalite M15A4 Handguard

[Caldee]

Hi, 

Does anyone know of a handguard that will fit my gun? On the existing one there is a little groove for the pin from the dust cover to slide into but I can’t seem to find any handguards on the internet that would allow this to happen. I have included pictures in case my explanation is confusing. Any help would be greatly appreciated. 
 

Thanks View attachment 99716

View attachment 99717

View attachment 99718

View attachment 99719

 

[Nick G]

I fear you might struggle. That hand guard sits much further back than on a 'normal' M4 platform . Usually you would see the upper past the ejection port cover . Is there a removable barrel nut ? You can see the difference in the fromt end of the upper in this picture, there is a lug for the dust cover rod and the front of the upper sits above the front body pin hole. What is it that you don't like about the existing hand guard ?

View attachment 99720

 

[Caldee]

Thanks for your response. 
 

That is something I have noticed about most other M4s regarding the dust cover lug. I believe it does have a removable barrel nut. 
 

I personally don’t have any issues with the looks or functionality of the existing handguard other than it being blue and there appears to be a screw missing from the top so it can slide forward (haven’t had it happen during a game). 
 

To be totally honest with you, I’m pretty new to the sport so was looking in advance of getting my UKARA to turn it all black. Starting to accept that I’m probably going to have to spray it. 

 

[Speedbird_666]

Yeh - you won't be replacing that - as @Nick G says, the geometry of the front of the receiver is not standard M4 spec. It looks proprietary to that specific Classic Army model (CAECR-5)

Is this bit moulded into the upper receiver? I'm guessing it is - and if that's the case the only rail that will fit that receiver is another Classic Army rail of the same design.

View attachment 99721

If the gun is good otherwise - run it until it dies. If you really don't like it, sell it and buy something with a rail that you do like.

 

[Caldee]

Yeh - you won't be replacing that - as @Nick G says, the geometry of the front of the receiver is not standard M4 spec. It looks proprietary to that specific Classic Army model (CAECR-5)

Is this bit moulded into the upper receiver? I'm guessing it is - and if that's the case the only rail that will fit that receiver is another Classic Army rail of the same design.

View attachment 99721

If the gun is good otherwise - run it until it dies. If you really don't like it, sell it and buy something with a rail that you do like.

I think I’m going to end up spraying it when I get my UKARA to be honest. The gun itself hasn’t put a foot wrong so far and I may keep a hold of it to try my hand in some simple upgrades etc.