• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

Airsoft bow....would anyone want one?

LancsSkirmisher85

LancsSkirmisher85

Members
Joined
May 21, 2021
Messages
4
Reaction score
0
Hi guys,

Fairly new here so be gentle :)

I'm an avid tinkerer and maker of anything and have been developing an airsoft bow just for fun... I was wondering if anybody actually would want one in a game and if so, what would you want from it? 

Apologies if I've posted in the wrong place!

cheers!

 
Been done on here already, do a search and you will find it. They may even appear and help you. 

 
Looks great! I've reduced the overall length (piston plus barrel) to make handling easier and reduce weight and aiming issues, most the ones I've seen are basically sniper set ups nailed to a bow so I've deigned from the ground up- I'll be able to post pics in the next week or so, if anyone would like to see :) how does it handle? Is it usable?

 
giphy.gif


Surely this makes more sense 

https://www.gdfb.co.uk/larp-archery-275-c.asp

 
Last edited by a moderator:
Sure, it would be interesting to see what you've come up with.

It's not that insane an idea, you're just using a leaf rather than a coil spring to shove a piston down a cylinder, and let's be honest, we're all playing with toys.

If it's draw-and-release rather than drawing to cock a latched spring, then consistency might be an issue, and CQB sites in particular might want to take a hard look about what it's really capable of, as opposed to how long a pull you use for chrono.

 
It's not a new concept, so the idea itself isn't that appealing. However if you were to create one with attractive parameters, then I'm sure a few on here would drop the cash on an impulse - airsofters always enjoy a bit of that action ?

 
I'd have one just for the Craic, but it'd have to be skirmishable, & there I think lies the problem, being able to set a consistent FPS that's not open to abuse?

Guess the only way to do that would be a fixed piston or draw stop, matched to your spring power ?

In the past I've considered picking up a cheap bow from wish etc & having a dabble to see what I could come up with.

 
Last edited by a moderator:
Tackle said:
I'd have one just for the Craic, but it'd have to be skirmishable, & there I think lies the problem, being able to set a consistent FPS that's not open to abuse?
Click to expand...
My dad used a compound bow for his so that the draw is the same each time. He's set it up to fire at basr power levels but you could change it to cqb friendly levels by swapping to a lower volume cylinder or adjusting the cams to reduce the draw.

He did the maths and even this cheap kid's bow he used is capable of in excess of 9J so he volumed it to be safe for airsoft and used the excess cylinder volume to feed the air back to behind the grip to keep the length down. He also made a buffer system in the front of the cylinder to stop it from tearing itself apart. 

View attachment 76662

 
Thanks for all the replies so far guys, all good input! My design so far uses a standard airsoft coil spring for consistency and has a limited cylinder stroke which sets the max fps (at full draw) to an acceptable level so it could only be fired at safe velocities with the current cylinder fitted so hopefully that should limit abuse :)

Any Thoughts on what might make it unsuitable for skirmish so I can keep that in mind? 

much appreciated!!

PopRocket123 said:
My dad used a compound bow for his so that the draw is the same each time. He's set it up to fire at basr power levels but you could change it to cqb friendly levels by swapping to a lower volume cylinder or adjusting the cams to reduce the draw.

He did the maths and even this cheap kid's bow he used is capable of in excess of 9J so he volumed it to be safe for airsoft and used the excess cylinder volume to feed the air back to behind the grip to keep the length down. He also made a buffer system in the front of the cylinder to stop it from tearing itself apart. 

View attachment 76662
Click to expand...
That's superb! I was toying with a side by side design but I want to keep it simple and as "normal bow looking" as possible.  Huge qudos to your dad for that work tho, he could probably sell that design if he protected it first!!!

 
Rogerborg said:
To the massive nascent market for niche toys in a niche hobby? ;)  
Click to expand...
He looked into it but it wasn't cost effective in the slightest. He'd have to sell the completed unit for at least £500 with all the hardware, printing and man hours that went into it. He was considering selling the files with the correct bits of tube or links to a supplier. 

 
This is very nieche, and is sought out by the few who may use one, but will be a very expensive and very limited ‘weapon’ in a game.

Anybody using one in game is going to be shot a lot more than they are going to hit anyone.

There was the AirRow now a few years back and was sold for a very short time.  Existing ones are closely held by those who own them and I’ve seen a few that have considered selling but quickly fall through as they won’t let it go

The AirRow was primarily sold for paintball but had airsoft and lead pellet versions, and was approx £500 complete with bow or about half that for the fittings excluding bow, but as in the thread below someone bought just the kit thinking they would get a ‘better’ bow for the money, but spent the same overall for an equivalent and the shop staff spent hours getting it all set up together 

Someone who’s experienced and has an existing bow would find it easier 

https://p8ntballer-forums.com/threads/thinking-of-getting-an-airow-gun.158448/



 
Hmm, now I'm fascinated to see how the air seal and feed mechanism would work.

 
They're cool, but waaaay to bulky at the front- I'm hoping to reduce that a lot!! As for costing £500...wow!! That's expensive as he'll! Haha

 
Rogerborg said:
Hmm, now I'm fascinated to see how the air seal and feed mechanism would work.
Click to expand...
My dad used a cut down tappet plate with an AEG air nozzle and hop up. You have to manually rack the air nozzle to load a BB then pull back the string and release to fire. 

I came up with a tappetless system to use the excess cylinder volume to move the nozzle so you didn't have to do it manually but we haven't implemented that yet. 

 
You must log in or register to reply here.

Similar threads

Gunboat Diplomat
If you could change the joule limit, would you?
2
Replies
34
Views
2K
Colin Allen
Colin Allen
Mtemprell
Cringe in Airsoft
4 5 6
Replies
101
Views
27K
THE CHIEF
T
Cocha
HK11/HK21: A question for the hivemind
Replies
13
Views
2K
Cannonfodder
Cannonfodder
W
Help needed - Really want to start Airsoft BUT..
3 4 5
Replies
99
Views
6K
BigAl
BigAl
T
FPS Question: Looking to buy a CQB P90 and need advice.
Replies
7
Views
2K
Dunt
Dunt
Back
Top