• 2FA temporarily disabled, emails not working

    Two factor authentication (for most of you 'email a code') has been temporarily disabled while we figure out why emails are not being received by large numbers of users. Emails are not sending site-wide. Please continue to use AF-UK as normal but note that you may be asked to log back in once this is re-enabled.

A & K vector magazine upgrade

Turbobob

Members
Joined
Oct 7, 2021
Messages
2
Reaction score
0
Hello fellow airsofters, pretty new to the sport only played a few games of cqb but purchased the above gun as I love it but the only problem I find is having to wind that silly wheel at the bottom of the mag every few shots. Is there any kind of mag out there that autofeeds or a drum mag electric or wind or a way of making a mag autofeed. It would be an absolutely awesome gun if it weren't for this. Any help would be greatly appreciated thanks in advance 

 
Nope. The A&K uses proprietary mags of which only High Caps are available. There may be a 3dprintable STL file out there for a midcap, but I don't think it was ever publicly available. 

 
Hi thanks for your reply. There must be a way with all these clever people out there to somehow modify a magazine. Do you have any ideas where I would even begin to look for one of these stl files. 

 
Hi thanks for your reply. There must be a way with all these clever people out there to somehow modify a magazine. Do you have any ideas where I would even begin to look for one of these stl files. 
Modifying a magazine to be a mid-cap is relatively straight forward, building drum mags and electric winding all possible.

The trouble is the limited market, the A&K isn’t hugely popular

 
Back
Top