• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

Search results

  1. NathanW8

    DAI Leisure - AVOID

    @alxndrhll I agree, DAI leasure is best avoided. I ordered a Hawke Red Dot April 23rd. They didn't contact me to let me know they didn't have stock. They respond to my emails by saying they'll look into my order and never got back to me. They said they'd refund me twice and still haven't after...
  2. NathanW8

    Hey no need to apologise, sometimes it's good to have a break. As you've got a new battery, it...

    Hey no need to apologise, sometimes it's good to have a break. As you've got a new battery, it does sound like your charger is a little broken. If I was you I'd ask round your airsoft friends to see if they've got an old charger they don't need. If they're like me they probably have several NiMh...
    • NathanW8
    • Profile post comment
  3. NathanW8

    Looking for GBB MP9 (UK)

    I've also been looking. There aren't any in stock anywhere in the UK. I suspect there is a licensing or manufacturing issue. There are a few sites listing pre-orders so hopefully they start selling them. The only place I've found with any stock...
  4. NathanW8

    Well R7 battery replacement/upgrade help request

    Hey. Hopefully you've got the issue sorted. If not I have a recommended purchase list: AEP lipo battery (£16) TM AEP adapter (£10) LiPo Charger (£24) Battery meter (£10) LiPo charging bag (£5) The battery meter and bag are optional. But I do recommend the meter to help ensure you don't...
  5. NathanW8

    What HPA Tank & Reg suited for MP9 GBB use?

    @Opforia Hey, I'm looking to run my MP9 with HPA so was curious what set up you settled on in the end? I don't have any HPA guns or gear so any advice would be useful. Thanks?
  6. NathanW8

    Over barrel suppressor

    Hi all, Does anyone know where I can get an suppressor that fits over the outer barrel of an M14 so it's not too long. The closet I have found so far is a 'Swiss Arms Barrel Extension G.O.O.B 320x45 14mm Thread', but I cannot find the internal dimensions so I'm unsure if it will fit. Thanks in...
  7. NathanW8

    ASG MP9 vs TM MP7

    Hey, Have you considered getting an SMC9, then you could get a GTP-9 pistol and use the same mags. 
  8. NathanW8

    Umarex/Vfc Mp7a1 V2 Battery

    @Mr. No_Face It's a gen 2 and does have the release button. I think the import version shoots a little hot at around 370fps. I've had a look at the spring and its very short and stiff. Looks like I'll have to cut down a few different springs to try out. With it running at 300fps I think a 11.1v...
  9. NathanW8

    Umarex/Vfc Mp7a1 V2 Battery

    @Mr. No_Face I ordered it form Land Warrior. It just arrived and works fine. It does however come with some paperwork that shows it only shoots at 303fps and to only to use a 7.4v Lipo. I suspect they might have detuned it, and recommend to use a 7.4v to avoid having to repair it under warranty...
  10. NathanW8

    Umarex/Vfc Mp7a1 V2 Battery

    Hi all, I've just ordered a Umarex/VFC MP7A1 V2. I've read contradicting information about what battery to use. I'd be interested to hear from anyone who has experience running an 11.1v lipo on the V2 at around 330-340fps to know if they had any issues. Thanks, Nathan
  11. NathanW8

    Tm Glock 18c AEP Threaded Slide

    Hi All, Just working on my project Pistol a TM G18c AEP. I was looking for a threaded barrel/slide and there isn't much choice. I however did find the new Novritsch SSE18 slide will fit. If anyone wants to do the same, it does require some slight modifications. The end of the plastic barrel...
  12. NathanW8

    What do I Need to Have an Adjusts FPS?

    @Adolf Hamster Thanks for the advice. I just thought it would be nice to have that adjustability without having to keep rebuilding my gearbox to chase a few fps, especially as the springs and seals degrade over time. I'm already running bearings on both the spring guide and the piston. I'll...
  13. NathanW8

    What do I Need to Have an Adjusts FPS?

    Hi all, I'm upgrading my Tokyo Marui Sig 552 and looking to fine tune the FPS. I’ve seen online that on some AEG's you can adjust the FPS with just a hex key. This allow for upto a 40fps adjustment. It looks like you can adjust the preload on the spring by moving the spring guide. But no matter...
  14. NathanW8

    What Rps Drop Is Normal on a Spring Upgrade?

    @SkaraThanks for the help. I've just done a full strip down and rebuild. Looks like when I fitted the motor end plate I pinched wire pressing the motor in too far and over loaded the bevel gear. This caused alot of friction on the right side bush and it picked up on the shim. After a clean out...
  15. NathanW8

    What Rps Drop Is Normal on a Spring Upgrade?

    Hi, I’m new to upgrades to airsoft. I have Tokyo Marui Sig 552 it was running at 85m/s and 14rps with a 7.2v20c lipo and 25rps with 11.1v lipo with a Warfet mosfet. I’ve just fitted the Guarder full tune up kit with a SP100 spring. The gearbox went back together happily and all seemed good at...
  16. NathanW8

    Advice Wanted V2 Gearbox

    @Skara Grazie millie! I'm an engineer and when I saw a video of someone shimming a pistons with washers and cutting teeth off, I was very confused. They preloaded the spring and have just one tooth where there would have been 2 or 3. Plus a heavier piston to accelerate and stop, along with...
  17. NathanW8

    Hi Everyone!

    I’m new here and thought I’d introduce myself. Started playing airsoft in the summer after a works trip to our local game site and can’t get enough. Haven’t been to lots of games due to lockdowns. To help with the airsoft bug, I’ve just got a Tokyo Marui Sig 552 as a project gun to play with...
Back
Top