• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

Search results

  1. S

    The right cylinder for the job

    Hi all, Away from home with no access to accurate measures at the moment, but planning on a build that involves a 363mm x 6.02mm barrel. I'd like to know the best cylinder to use for the job? - I should note that the piston and gears are short stroked by 2 teeth and the AoE has been corrected...
  2. S

    Best shooting glasses

    Hi all, Plenty of little tidbits on various glasses around but nothing too concrete or up to date. I'm looking for any info anyone has on their experiences with any shooting glasses and their performance. I know the biggest contenders with ease of availability are the Revision Sawfly's, ESS...
  3. S

    ESS ICE vs Suppressor vs "Other"

    Hi all, In the market for a new pair of glasses. I'm between a few, namely the ICE for their very common reviews and good write ups, and the suppressors because I use ear pro a lot (Howard leights Impact Sports).           - Side note, can someone tell me if the ESS Crossbows and ESS...
  4. S

    G&G GC16 Wildhog 12" ETU / MOSFET dead

    Hi all,  I've never worked on one before or know how the internals are set up, so I need a little help! So it died a few weeks ago, I had been using it on an 11.1v LiPo for a while without realising I was using a 30c LiPo... Whoops. Now all I know is that I have 2 real options (maybe 3). - ...
  5. S

    Airsoft Engenuity - PTS MKM (LM4) Adjustable nozzle

    Hello all, Thought I would make a brief review being as in depth as I can without wasting too much of your time. I recently dived into the world of HPA - HOWEVER before you bring the pitchforks out, I am using the tanks to fill my GBBR's. My issue when using it for my PTS MKM however is at...
  6. S

    PTS Mega Arms MKM AR15 Jam/Vent

    Hi All, Had my PTS MKM a little while now, loving it, but on some mags it has the tendency to jam now and then due to a double/bad feed. - which would cause the next shot to vent the gas. I have been through top to bottom of the mags, the trigger and all associated parts, the bolt and nozzle...
  7. S

    PTS MKM AR15 tips & tricks

    Hi all, I'm about to join the GBBR gang soon and get my hands on a second hand PTS Mega Arms MKM AR15. It only has 2 upgrades: Hardened bolt carrier and a tightbore barrel. I know how to take care of the rifle but is there anything I should know about the rifle, things to look for and...
  8. S

    Airsoft equipment bought by MOD

    Hey guys and gals, My manager (ex Marine) just told me about an Airsoft’s company that made a fancy rig that the MOD bought which subsiquently failed and fell apart. He didn’t name names. Just wondering if anyone here knows the full story? As I’m quite interested Cheers -Corky
  9. S

    ICS Upper Gearbox (DMR configuration)

    View Advert ICS Upper Gearbox (DMR configuration) ICS Upper Gearbox in a DMR setup. Condition: Like new, less than 200 rounds shot. FPS: ~460 Parts list: - ICS Upper Gearbox, was used for a 240fps build preciously (est 2000 rounds so GB shell should still be more...
  10. S

    Motor only works when I hit it

    Hi all, A very odd one.. good luck. ZCI HT + replaced brushes  Tomtac 13:1 gears (ss 2 teeth) 7.4v / 11.1v My motor has an issue in that it randomly cuts out.  First I tested the setup by removing the mosfet and wiring directly to the motor.     Nothing.     2 tests, 1 inside, 1 outside...
  11. S

    Acetech ac5000 vs Xortech 3200 (new version)

    Hi all, needing a chrono soon. on a budget so trying to be as cheap as possible. Whats my options? (couple ideas to compare in the title). thanks
  12. S

    [Resolved] ZCI motor disassembly issue

    Hi all,Having a hard time opening my ZCI motor to fix an issue with one of the armature connections. I know how and have taken motors apart before, however this one doesn't seem to want to budge and I don't want to destroy what seems to be a fairly soft end-bell. Thanks in advance, Corky...
  13. S

    [Advice] Tomtac gearbox parts (mainly gears)

    Hi all, brother and I are about to put together a little project gun for kicks. I've got all my parts sorted and ready to go but I wanted to know all your opinion.. A long while back I got a tech to do some work for me and I asked for 13:1 gears to be put in, he ended up putting in Tomtac...
  14. S

    Custom made MLOK rail

    Hi all, Currently in the process of cutting off the side and underside rails of my beloved ICS CXP 16 L. My idea is to then drill out MLOK slots, I have the dimensions ready and the tools good to go... however, I do not know if MLOK slots must be a certain depth?? If anyone knows (the...
  15. S

    Fobus EMC - light bearing holster - leg retention

    Hi all, I'm looking to more securely hold my Fobus EMC light bearing holster to my leg (currently on a belt clip which I wish to keep). Something like the safari land holster's leg strap would be ideal but I dont know where to start to mod the holster to use one (I have a spare elastic band...
  16. S

    9x19 blanks questions

    Hey all, My shooting buddy picked up some 9x19 (Luger I think) blanks as he thought I used them in my VTG, is there any Airsoft BFG that actually takes these or am I better just handing them back rather than selling them on? side not: selling 50x Fiocci 9x19 Luger blanks  Thanks! Corky
  17. S

    Helmet cover help.

    Hi all, I have an Emerson EXF helmet modeled after the TeamWendy EXFIL bump helmet. looking to get a cover for it but I can't find any clone TeamWendy ones only FAST helmet covers,  will these fit just as well or am I best just spray painting to change the colour and pattern? Thanks, any...
  18. S

    What are these clips?

    Hi all, clips found on the inside of my plate carrier (front panel). Came clipped together across the way, but I'm wondering if they have a useful purpose before I cut them off due to them being rather annoying thanks!
  19. S

    Glasses + mesh mask

    Hi all, Wanted to try and change up my loadout a little bit with a pair of glasses (pair not relevant) Question for all you crazy people is, and I might be crazy, can a bb bounce up off the mesh and into my eye? Now most if not all glasses give enough protection from the side but not under, I...
  20. S

    Gearbox lock-up, motor issue

    Hi all, Last night I changed my G&P's stock m120 speed motor out for an SHS high torque, apart from the pinion gear having "slightly" different angle on the teeth, both motors were about the same. Shot a couples times and it locked up altogether. Took out the SHS motor and the pinion gear...
Back
Top