• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

Search results

  1. pyromancer6

    Solink Motor Pinion stuck - any ideas?

    Hi, Been finally getting around to doing a build of mine I've had parts bought for ages at this point and it's been ground to a very annoying halt - the Solink Lite 28k that I bought a while back has the 1.3 allen on so tight that I can't get it off, even with heat. I know I'm going to have...
  2. pyromancer6

    The ASG Armalite M15A4 saga

    I inheriated an ASG M15A4, aka a Classic Army [if I'm not mistaken] M4 replica at the start of the year as payment for fixing an otherwise dead CYMA CAR-15, getting it back to funcuatal with a fresh ZEUS mosfet and an incredibly shitty solder job - besides the point: I've got an old ass ASG...
  3. pyromancer6

    ASG or DE SPAS-12?

    Title, currently after a SPAS-12 and was wondering if the Double Eagle is worthwhile seeing as it's a little cheaper than the ASG. Both are just TM clones, and TM is completely off the table because I am not paying upwards of 200 quid for a plastic spring tri-shot lmao Plus the markings on...
  4. pyromancer6

    ASG Armalite M15A4 - does it have much potential? (+ hop unit question)

    Hi all, Recently brought a friend's CYMA CM.009D back from the grave and had a blast fixing it up with a new board, gears etc to the point where it's shooting lovely which we've then sold for a really decent price (as in a good deal, we're not merchants ?) to friend who's the entire reason we...
  5. pyromancer6

    CYMA MP5 has died of death after motor adjustment - any ideas?

    Hi all, Just following up from my previous profile post bitching about my guns being broken - I was adjusting the motor height on my completely standard CYMA High Cycle MP5 because it was sounding a little screechy and ended up pushing the motor in too high, to which I then lowered it back down...
  6. pyromancer6

    Super noob SHS gear question

    Hi all, Recently been taking on this M733 CYMA as my first real forray into 'fixing something' that was previously fucked - it was working great until on a game day it decided to get locked into safe on every position (safety catch, new one is going in as we speak to hopefully fix it) but with...
  7. pyromancer6

    What's the sturdiest G36?

    Hi all, I'm an owner of a JG G36K that I've had for a little while now - we've had our ups and downs, and it's had plenty of money thrown at it to make it good. One thing that's always bugged me was how creaky and plastic-y it's always felt so after deliberating on ordering replacement parts to...
  8. pyromancer6

    CM.009D [CYMA M733] barrel & front end wobble, any fix?

    Hi all, I've been blabbering on my profile about a 'works proper good' CYMA that a friend picked up second hand a while ago to do some sort of counter-strike style build (it was broken when recieved, and has sat in a gun roll for the best part of a year now) and I've spent the last few weeks...
  9. pyromancer6

    DE UTR-45 power problem after jam

    Had a pretty catatrophic BB clog/jam on Sunday's game day with the UTR after it was struggling to feed with the ZCI plastic M4 unit that I put in it alongside a longer 6.03 and a ML macaron, and ever since clearing the jam of around 10+ BBs through the hop-end of the barrel caused by an unlucky...
  10. pyromancer6

    Warrior Assault Systems: DCS or LCP?

    After much deliberation I've decided that I've outgrown the humble viper carrier/belt setup of mine and want to get into some decent gear without breaking the bank, and after seeing a Warrior Assault Systems rig in person I've decided to get one myself - although I'm at a bit of a crossroads. I...
  11. pyromancer6

    CYMA MP5 cocking tube

    Hi all, Recently picked up a lovely CYMA CM041 w/ a torch handguard, but unfortunately due to roller delayed related mind control I ended up fucking the charging handle that's within the cocking tube, I know: no way - I was going to order a replacement but thought I'd have a look beforehand so...
  12. pyromancer6

    CYMA Platinum SLR Rifleworks AK-74 hop troubles

    Hi all, I recently picked up (financed the fuck out of) a CYMA Plat AK74 with the SLR rifleworks handguard and stock on it, and while it's been pretty dependable and honestly a lovely gun over the last 3 months of ownership (apart from it contracting selector-itis in last Sunday's outing, which...
  13. pyromancer6

    Jefftron Leviathan V3 Sticker Pickle

    Hi, Me and a mate recently picked up a Jefftron equipped AEG off a gent on here, and after fucking around with it for a while (seriously, why do you need a password for your gun lmfao) we managed to get it working apart from a few niggles with the selector - with it not being able to pick up...
  14. pyromancer6

    VFC USP 9mm - Is an enhanced recoil spring possible or viable?

    Evening lads, I field a VFC USP9 as my primary sidearm but it's unfortunately a bit of an oddball (seriously, you search 'USP' and nothing but the HK45 or the MK23 comes up) meaning that 'upgrades' and parts in general are very scarce or non existent - however last month I decided to pick up a...
  15. pyromancer6

    Odin Speedloader Adapter for UTR-45

    As the title says, anybody have any idea on a solution for a M12 sidewinder's adapter for the Double Eagle UTR-45? Loading the magazines manually is a nightmare and it feels like I spend half the game day doing so but I can't find any sort of adapter for the UTR magazines, as apparently the...
  16. pyromancer6

    Double Eagle UTR-45/M917 SHS High Torque Motor Results

    Hi lads, Recently decided to bite the bullet and grab myself a SHS high torque to throw in the workhorse [for better or for worse] just to see what'd happen, considering there's a SHS high torque in my G36 and that thing's a fucking animal (although it was fully built by a very certain sweary...
  17. pyromancer6

    Golden Eagle m870 gas tank valve misery

    Hi lads This is a complete shot in the dark but after tearing my hair out and searching everywhere I just can't find an answer - what kind of valve key do you need to take this bloody thing out?? Every thread, forum or video I've seen simply says "just use a flathead" (which is impossible as...
  18. pyromancer6

    CYMA CM.098 midcap nightmare

    Hi lads, first post on here so forgive the dodgy etiquette or if I've missed something I recently picked up one of the CYMA Platinum CM.098s, the 'quick-detach suppressor' variant (that was robbed of a 14mm ccw thread for whatever reason) from a fella used and while it's in relatively nice...
Back
Top