Search results for query: *

I saw something on negaive airsofts video's that i thought was pure genius, my arp9 is my cqb gun but i like to use it outdoors as well so im getting another barrel and hop made up with a 200mm barrel for outdoors and keep the 128mm for cqb. I need a second hop unit for my arp9 but it's a fussy...

I'm after a 0.5" or 0.75" outer barrel extension 1" is just a but too long anyone know of a place that sells lengths like this 

So I have purchases purchased a used e&c strike industries pdw it has had some work done to it by the previous owner and has 13:1 gears with 4 teeth short stroked 2 off the pickup 2 off the release with a 200mm zci inner barrel zci hop unit Maple leaf Mr hop and warhead 35k and perun v2 with...

So I have always used .28 bb's but ran out while tuning my guns fps on .28 I was hitting 275 to 279 just Iver a joule when I put. 25 in I was getting 295 1.17 joule Is this normal as 1.17j is over the 1.14j limit I won't be using .25's with aeg on the field but the huge jump concerns me

Ali express has literally stopped selling most airaoft AR15 parts and I am desperate for an extended end plate with or without castle nut for my m4 pdw build. I want to buy the below in full black or black and red if that's what they have. 

Can I short stroke 4 teeth (2 pickup 2 release) on a 200mm barrel I've done it with all my 270 - 300mm barrels without issue and it makes a lovely sound very snappy semi AEG but at 200mm length I'm a bit concerned about air volume 

I'm after a ZCI rotary hop unit and it's out of stock absolutely everywhere. Anyone know of an obscure airsoft shop that stocks them

I would like to work out what spring is in an Aeg I have just bought. Its an arp9 but has had a 200mm barrel fitted and 12:1 gears but no short stroking and shoots at around 305fps with .25 bb's

So I'm thinking of reducing the length of my barrel to create a nice cqb size gun and was wondering how much fos I would drop going from 200mm to 128mm I'm currently shooting at 305fps with a .25

So my specna H12 has a slightly different stock tube it appears the retention part that holds the stock in as you extend and retract is deeper set that my other aeg and the sling plate has a bigger opening and the buffer tube actually passes through it instead of sitting on top. I want to...

As stated above I want to increase my fps a bit I'm using a 300mm zci 6.02 barrel how much fps would I gain by increasing the barrel length to 340mm?

So my new gun has arrived and I want to buy a new battery for it with higher capacity. My current batteries are nuprol 1450mah 11.1v 30c lipos I was potentially looking at a 3000mah 11.1v lion  How do these nlcompare to each other in regards to power and performance 

So my gun shoots like a laser but after skirmishing it this evening I had massive accuracy issues after the first 90 minute game and looking my barrel it was full of a white residue I managed to removed it all with the unjamming end of my cleaning rid and my accuracy went back to laser perfect...

Ok I'm at my wits end after lots of trial and error I have worked out that my warhead base 27k motor is the cause of all my pain. When I install the warhead motor in my gun the fps is all over the place with lows of 280 and highs of 330 on .25 but when I put my old ifrit motor in my fps is...

So my build is: ARP9 13:1 zci gears short stroked 3 teeth + shs delayer chip  New compression  set stock nozzle  Gate titan advanced  Warhead base 27k  11.1v 30c lipo I'm having an issue where the nozzle is always in the precocking position no matter what percentage active breaking I use...

So I managed to grab a CM16 SRXL from used airsoft for £80 boxed like new but was only shooting 210fps. I fixed this instantly by replacing the old style hop unit with a zci rotary and a new spring. Now this is my 4th rif and I have decided that this could be my DMR build but I wanted to know...

As stated above I'm after the length of the stock arp9 nozzle

My slide stop lever of my sti tti combat master pistol has broken and I need a replacement but cannot find one anywhere can someone help

So just installed my shiny new warhead base 27k motor and it occasionally locks up in semi and I have to go to full auto to clear it. I have a perun v2 hybrid so it not feathering it just makes a clicky crunchy noise. I initially thought my anti reversal latch had gone so I checked swapped it...

how would an 18:1 with 30k warhead motor compare to a 13:1 with 22tpa zci motor in trigger response