• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

Search results

  1. skillfulmmd

    Ak's and accuracy?

    I have an AK that I want to make as accurate as possible as its long and heavy I've decided to try and get it to be as accurate and reliable as I can. My only other AEG I've ever used is my Honey badger which I've tuned for speed and semi-auto response and accuracy was never a massive interest...
  2. skillfulmmd

    Ak FPS issues

    Got a second hand E&L AK 104 PMC that is meant to be shooting at 345FPS and is coming out at 100FPS average on .20's any ideas on what could be causing this as I am going to try and strip it tonight (have no idea on how to even strip an AK but hey ho) and wanted to make sure I checked the...
  3. skillfulmmd

    E&L AK stripping guide?

    Go my first AK but it's second hand so I wanted to strip it down learn where everything goes and see if any bits are more worn down than I would like etc. I couldn't find any guides for the E&L 104 series so wasn't sure where to start can anyone help me out?
  4. skillfulmmd

    Question about a gun sale dispute.

    I recently sold my gun to someone over on weapon crates and he has opened a dispute long story short he is asking for £70 back due to a GHK mag leaking which I know 100% was not leaking previous to being sent as I tested it and packed it very well, I can only assume he has done something to the...
  5. skillfulmmd

    POM parts?

    I've been thinking about changing a few of the internals of my current gun for performance and noise reduction reasons and have ventured upon the POM parts you can get after looking up which materials and parts do what best. I feel like this would be good for my current build but wasn't sure how...
  6. skillfulmmd

    Thinking of grabbing some coms

    Would the following model be acceptable as a starting point for milsim? Baofeng Pofung GT-3TP Mark-III if not what are some other reccomendations? 
  7. skillfulmmd

    Selling a gun abroad advice needed?

    Hi Guys, I am selling my GHK G5 and have been approached by a potential buyer who is located in Lithuania. I wanted to know first and foremost if its legal for me to sell and ship a gun out of the Uk and if so how can I can best cover myself from anything fishy happening during the transaction...
  8. skillfulmmd

    VSR 10 trigger guard replacement?

    Hi guys, My VSR-10's trigger guard has broken is there anyway to get a replacement the only one I can find is the PDI one which is £60 which I dont fancy paying for personally. Any help would be much appreciated.
  9. skillfulmmd

    Help lining up the two optics

    Hi guys, I just picked up an EOTECH holo clone to use with my rear magnifier scope but I'm having issues lining up the holo sights dot with the magnifier. If you look at the images here you can see that the rear optic seems to not sit flush and the red dot is well off when looking down...
  10. skillfulmmd

    Removing the stock RIS from Ares AM-13

    Does anyone that owns the AM-13 or AM-14 know how to do this as the only video I've seen online just says to remove one screw and it should slide off. Mine however, no matter how hard I pull won't budge and I don't want to break it trying to take it off.
  11. skillfulmmd

    Madbull 3 in 1 hop unit questions

    Was looking to upgrade the hop up unit in my ares AM14 and as far as I can see its a standard fitting if this is the case the Madbull unit should fit. My question is related to the tracer add on for this how does it draw power is it via the gun or does it need and external power solution and if...
  12. skillfulmmd

    Ares Amobe AM-13 quesrions

    Hi all, Thinking of picking one of these up to play at my local CQB site (UCAP Bunker) as massada is proving to be a little too long and is not good in the more confined areas. I was wondering if anyone knew if standard v2 gearbox upgrades would fit and is it possible to switch the trigger out...
  13. skillfulmmd

    Question about FAST helmets

    I have an Opscore clone FAST helmet at the moment and decided I want to get some googles instead of using glasses due to the fact I can mount them to the helmet and I like that they cover more of your eyes. What googles are good to go for and have the ability to be used with a FAST mount? I was...
  14. skillfulmmd

    BEst googles for FAST helmets?

    Looking to get some nicer eye wear for playing and I have seen a lot of players with googles that seem to attach to their FAST and MICH helmets can anyone point in the direction of these types of googles and give recommendations?
  15. skillfulmmd

    Belt and thigh holster issues

    So I just got a new Hicappa 5.1 Gold match to use as my sidearm but have run into an issue with my Belt (Viper lazer belt) and thigh rig (Cytac Hi cappa holster combo) the Cytac dosent has a clip so that you can clip this too you're belt to hold the rig in place however my belt hasn't got the...
  16. skillfulmmd

    Looking to get a sniper to complete my arsenal

    Hi all, I have a solid all round AEG and a nice short CQB rifle I was looking into getting a sniper to use on the larger sites around me but wasn't sure what brand and models are good go to choices any suggestions are greatly appreciated!
  17. skillfulmmd

    Looking for a flashlight

    I need a flash light as I am planning to play in a very dark site in two weeks so require some for of light for my gun. I've been looking around but can't find anything solid that I think will be good I would preferably like the momentary on and off option vs just having it on or off. Also I...
  18. skillfulmmd

    Questions in regards to upgrades

    Hi there, I recently picked up an ARES Amoeba honey badger and was wondering if there are any upgrades that are recommended to get this up and running as good as it can. After doing some research it seems that a pro-win hop unit and a tight-bore barrel will keep it ticking over but wanted to...
  19. skillfulmmd

    some question on some addations

    Hi guys and gals, Looking to get some advice on a few potential purchases for my magpul PTS Masada. Would the following trigger fit? http://www.fire-support.co.uk/product/speed-m4-standard-trigger-b if not can you recommend something similar. I was looking to get some more PMAGS but didn't...
  20. skillfulmmd

    Magpul Masada Sling point?

    HI all, I am looking for a sling for my Magpul Masada ACR but the only one I seem to be able to find is the Magpul single point mount. Is there any 3 point solutions I can use or another single point that isn't so pricey? Thanks in advance.
Back
Top