• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

Search results

  1. N

    KWA Vector with “issues”

    Nothing mechanical, just has some dodgy paint work that I can’t remove, but I am working on it ? and someone well before me tried to sand it off.   I got it from a friend who got it about 8-10 years ago from someone who used it as a prop in an amateur movie.    anyway, mechanically it’s been...
  2. N

    WE M4 out of storage

    Just gotten my gear out of long term storage, been away from it for about 3 years ish, what’s the points to check/replace before play. Haven’t gassed it up yet or anything just looking ahead.    clean it out, relube, I imagine the bucking won’t have enjoyed itself? Will it need replacing or? ...
  3. N

    Kwa Vector

    Looking for a friend who’s no longer in the country. He has (well I have it now) a KWA Vector in so far as I can tell good nick, internal wear is minimum, it’s not been used in over a year, closer to two, and saw rare use before then.    it has one 50rd mag, one short, possibly 25/30rd mag, a...
  4. N

    TacVector Maverick

    I’m about to grab one of these as it’s rated for RS and my WE M4 finally killed my M68 clone. I’ve seen that in the states there’s quite a few red dots in the same style for RS shooting that are about $20 dollars. Given that we don’t really have a big shooting market here though I can’t seem to...
  5. N

    GBB MP7

    I’m looking at getting another GBB, this time an MP7. Looking around I’m seeing a WE New Wave Small Rice.  A few questions, one, what is New Wave Small Rice? Is it a translating error or?  Two, what’re they like out of the box? I’ve read a few reports that the trigger groups are crap. Are...
  6. N

    Gotta restock gas, but which brand?

    I’ve been looking all over and can’t find much info. It’s a tossup between the nuprol 2.0 I’ve been using for a year or so, protect/smart gas, abbey, or zeroone pro gas.  Protech and smart are the same and quite cheap, but difficult to find, at least for me, in the UK  Abbey is always good...
  7. N

    WE M4 overhopping

    I’ve got a strange problem. I haven’t used it in a few months but my M4 is now over hopping even on .3 and the hop turned off. I cleaned it every time it was used it’s got a maple leaf autobot 70 in it and an omega nub, maple leaf crazy jet barrel.  The hop rubber itsself looks fine but I’ve...
  8. N

    WE M4 compatible barrels

    Im looking for a shorter barrel for my WE M4, maybe its just me but they're seemingly like rocking horse shit atm... I cant find anything in the 260 range at all. Maybe my googlefu isnt as good as I thought it was. The only thing I've found is a Maple Leaf Crazy Jet, but I haven't really looked...
  9. N

    Inner Barrel length -WE M4

    I’ve got a WE M4 with the standard barrel in it atm, I’ve got the barrel extension off and a mock suppressor on the front. However I want to shorten it and take the suppressor off, but in doing so, how much performance is lost in losing the barrel length? The NPAS can be adjusted for the FPS...
  10. N

    Current stance on GBBRs - been away for a while

    I've been somewhat absent from the sport recently, and as such haven't had much experience with the new laws regarding airsoft. I've read the fews posts here about it but none of them seem to point to a definite answer regarding any type of airsoft weapon, however gas and HPA seem to be the most...
  11. N

    Differences between Maple Leaf Autobot and Decepticon rubbers

    I'm just wondering if there's a discernible difference between the two? The description says that the autobot increases range and the decepticon increase accuracy but at the cost of range. I'm just wondering if anyone has first hand experience with either. It's going in a WE GBB M4 with a stock...
  12. N

    G&G CM16 magazine compatability

    I'm jsut wondering if these would fit in a CM16? http://www.patrolbase.co.uk/stanag-magazines/mag-130-rounds-magazine-for-m16-series.htm#.Vum0ENBju4k Cheers
  13. N

    Best battery for G&G CM16 L

    As the title, gonna get my brother a gun for his brthday so he doesnt need to rent, but Im stuck for what battery to get as I started with a gas gun. Cheers
  14. N

    WE GBB M4 triggers

    I'm just wondering if anyone could offer some advice. I've read that the Stock triggers are made from something akin to a hard cheese a few times, but mines has fired around 6k bbs and only just started double firing. Is it worth to replace it with another Stock unit? Or go steel? My...
  15. N

    WE GBB M4 charging handle

    Hey, just wondering which charging handles will fit as mine is starting to show little stress cracks. I know the RS one does with a mod but availability over here is a problem. Are there others, modded or not, that fit? Cheers
  16. N

    Best winter gas - Opinions

    I'm just wondering what you guys have found to be a better gas for GBBR's in winter? I've used the nuprol 3.0 with terrible results, standard green gas gives decent results but after a few fills the performance drops off, I'm hesitant to try the nurpol 4.0 but I have heard that its a better gas...
  17. N

    WE OB M4 nozzle broke

    I fitted a winter spring and a new bucking and barrel in my m4 tonight and while I was firing it, it jammed with a broken bb. I pulled it apart and cleaned it out and noticed that the bit around the nozzle that looks like the m4s locking lugs has cracked and is lose. Anyway, long story short...
  18. N

    Nuprol 3.0 gas poor performance

    I bought some nuprol 3.0 gas for the colder weather and while trying it out I was getting about 20 feet before the bbs dropped that's if it cycled at all. So why? It's for cold weather it's 10 degrees tonight according to the car, so why the poor performance? Thanks
  19. N

    We v2 mag jamming

    I have a problem with my we m4 gas mag. It's a double stack mag and as I'm firing it, the top two bbs seem to jam and the gun just cycles gas. I'm just wondering if anyone knows what's causing it and how to fix it? Thank you
  20. N

    WE M4 Upgrades

    Hey guys, ordered a a WE M4, and I'm just wondering what I should replace in what order? I've read that the steel bolt can be a pain to install at times, and that it causes increased wear on almost everything, so if i was to replace it, what else would need done at the same time? Thank you.
Back
Top