• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

Search results

  1. n1ckh

    Finally done it :)

    So far I've put them in 2x G&G M4's (woodland & cqb rifles) & my JG G36C about a year or so a go & still going strong. With the G36, I found it easier just to remove the contacts to do the soldering, I run them all on turningy nano tech 7.4v lipos after all my nimhs finally gave...
  2. n1ckh

    Finally done it :)

    Will do mate, it was a right bollock ache stripping the box down & keeping track of everything but it's done :)
  3. n1ckh

    Finally done it :)

    So putting a mosfet into a V2 or V3 gearbox is easy (done 3 of my rifles so far) but after a few months of pissing around & putting it off. Got bored today so finally got the wiring done to accept a mosfet into my G&G SA80 Man is it a weird gearbox, took plenty of reference photos as I...
  4. n1ckh

    S&T PPSH-41 weirdness.

    You mention high speed gears & motor. This could possibly be the problem, if you've got a high torque motor then try that High speed motors aren't generally used to pull monster springs along with high speed gears. With so few combined teeth on the all the gears, your not pulling the piston...
  5. n1ckh

    Blown 'fet record?

    All my rifles used nimhs for well over a year but as they've given up over time, I've replaced them with lipos. I'm fortunate to have 2 programmable chargers from rc racing & lipos so I'm ok there I even did the Lipo conversion for my Glock 18c electric pistol (which I still use from time...
  6. n1ckh

    Blown 'fet record?

    1 fet & 1 Lipo so far, i used the low resistance silver upgrade wire that got hot in cqb, casing melted together & shorted out so that all went in the bin straight after. If I feel the wiring might pinch somewhere then a bit of heatshrink on that area to protect it along with heatshrink...
  7. n1ckh

    Vickers Machine Gun DIY build (Pic heavy)

    Laser cutting is far more accurate & leaves cleaner lines
  8. n1ckh

    Ares question

    That's my point, skoda have got better compared to what they were like years ago & given time then Ares should/will get better
  9. n1ckh

    Ares question

    One word to describe Ares & how there changing SKODA
  10. n1ckh

    Fast Helmets

    Depending on the environment, if I'm indoors then it's full face & helmet but if I'm outdoors then it depends if I wear goggles or full face with a boonie, helmet or bare head & also depends if it's woodland, open ground or with buildings
  11. n1ckh

    "Budget of ££ - £££, what gun to choose?"

    I'm glad I read it cause now I know marui parts are compatible with my kjw g23 :)
  12. n1ckh

    Where to get a decent G36?

    Do yourself a favour dude Get the JG G36C from taiwangun, its a great gun, cheap & you get a hi capacity magazine with it Use the free downgrade service, your kept in the loop from dispatch to delivery. I have one & after 15 months now, the polymer piston has to be changed from wear...
  13. n1ckh

    KJ works G23

    Certainly made it a little better & will sand down the slide rails aswell but I have to see what happens once I'm out in the cold weather Think I may go with a 130% or 150% spring & see how it goes
  14. n1ckh

    ukara query

    Send in your driving licence or passport as proof of identification & a few household bills (telephone, water, gas or electricity will do) as proof of address Your driving licence will have your address to backup utility bills aswell Dont send copies as they can be faked & may not be...
  15. n1ckh

    KJ works G23

    I've had it going on a little while now but & it happens when it's warm or cold I sanded the part that pushes the hammer back & it still does it, I also sanded the black finish off the slide rails & again no joy I'll give the trick in the photo a try & see what happens
  16. n1ckh

    KJ works G23

    Been having a problem with my Glock for a little while now :( the problem is that the slide will not fully fly forward & gets stuck around the hammer area It's well maintained (cleaned & oiled after every game day as is my M1911) & I put a 6mm spacer ring on the recoil spring...
  17. n1ckh

    Why aren't chronos consistent?

    I have found in all the sites I've been to (6 sites so far) 4 have used the same chrono device (don't know the name but its the big yellow box chrono's) & my rifles have all been under the limit & the other 2 are primarily paintball sites so they use a paintball chrono & this throws...
  18. n1ckh

    ICS L85A2 isn't firing ?

    These seem to be common faults with this rifle, I played a game day where a kiddie only had his ICS L85 & was having issues before the day began. It was all due to the trigger unit & a little lever would click & jump off but he had it repaired twice & was seeking for a refund
  19. n1ckh

    Anyone fitted a microswitch in a v2 gearbox?

    If I was going to go the micro switch route in my aeg's then I was toying (see what I've done there lol, please don't hurt me) with using the long tail switch. You can use spade connectors on the contacts & after a bit of grinding & placement, bend the tail if needed onto the trigger
  20. n1ckh

    ICS CXP APE

    From habit, my safety catch comes off when game starts & goes back on when I'm hit respawning, I'll do this all day Rifle is always unloaded on route to safe zone but pistol is always made ready (magazine in but not cocked with safety on) My ICS dropped to 260 after a year of abuse so if...
Back
Top