• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

Search results

  1. I

    Gate Merf 3.2 not working correctly? F2000 semi-auto trigger not working

    If the tape isnt working then the problem is probably with the semi auto contacts. You might have nipped them up a little with the heat and it's holding the dolly. You should be able to see the dolly resetting when you cycle the gearbox. I need to head out for a bit - will be back in 1...
  2. I

    Gate Merf 3.2 not working correctly? F2000 semi-auto trigger not working

    before you do anything. Pop a piece of tape over the plate on the trigger style contact... You may have just lifted the auto fire pins With the tape in place you should just get semi. Provided that works. the next step is to just lower one of the little contacts on the inside of the...
  3. I

    Gate Merf 3.2 not working correctly? F2000 semi-auto trigger not working

    Yup cut on the yellow crosses. Yellow tag wire can be discarded. Deans directly to the motor with some wire, I often just solder directly to the motor with that gearbox as the cage can be removed with the wires on. Purple to the signal wire.
  4. I

    Gate Merf 3.2 not working correctly? F2000 semi-auto trigger not working

    1. Remove signal wire. 2. Move front trigger wire back to original position. 3. Cut the + and - wires as per this diagram. 4. make a decision - You can go with the double signal wire. Solder it to the green area wire tags. Preferred method. Polarity doesn't matter as this circuit is...
  5. I

    ARP 556 loose charging handle

    She's a shelf queen now!
  6. I

    Gate Merf 3.2 not working correctly? F2000 semi-auto trigger not working

    Dude it's the same as the AUG. The single wire system only works when you have a single set of contacts, like a regular V2, V3 (AK). As soon as you have a secondary set of contacts the method I put above is the easiest way. 2 cut's and just run 2 separate loops. It's actually on the same...
  7. I

    Gate Merf 3.2 not working correctly? F2000 semi-auto trigger not working

    Your wires should look like this. Cut on the white crosses. I think what you've done is use the signal wire to carry full current, hence it shutdown. The diagram above with the double signal wire directly to what is now an isolated contacts circuit. The motor directly to the Deans, as...
  8. I

    Airsoft Battery Advice

    Overlander have a near identical one on the website. I would imagine they come from the same place. https://www.overlander.co.uk/2200mah-11-1v-3s-35c-supersport-pro-lipo-battery-deans-connector.html same weight 169g, same capacity, same voltage, same C rating. sizes are also pretty much...
  9. I

    Zci barrel causing misfeeds and jams are mad bull barrels any good

    Spot on it's feeding at least then. Might be a dodgy barrel, Check the window for burrs. And drop a few BB's through the barrel to see if there is a spot where it catches. To inspect the window - have a poke about at the edges see if there is a wire edge that has folded - remove with a...
  10. I

    Zci barrel causing misfeeds and jams are mad bull barrels any good

    Whoa guys! The gun is feeding fine on one barrel with the same feed nozzle and hop unit. It's only the barrel change that's causing the issue. Feed nozzles only go into the hop and touch the barrel. Therefore the issue isn't feed nozzle, tappet spring, Midcap syndrome, or hop unit. The...
  11. I

    Which Mosfet for my upgraded F2000 (Cyma, v3 gearbox)?

    Those Fet's still use Standard contacts and a COL. So the fact it's a 2 stage trigger makes no difference. I've dropped my mates Merf into my AUG with the nano hard, And yes you can just drop them in if the gun is already setup on that system. And all the features work, you just have to retrain...
  12. I

    Mixing bushings and bearings?

    It's not worth overthink TBF. I tend to run bushings because they don't collapse. If you are building for performance then we don't have the same demands as the USA market. Less motor loading, less gearbox stress. It is more than possible with the UK 350fps limit to get 25rps with a 7.4v...
  13. I

    Which Mosfet for my upgraded F2000 (Cyma, v3 gearbox)?

    loads of places have MERF stock at £40. Patrol base, Thecage, bespokeairsoft, surplusstore. Most are £5 delivery. https://www.surplusstore.co.uk/gate-merf-3-2-aeg-mosfet.html
  14. I

    Zci barrel causing misfeeds and jams are mad bull barrels any good

    Madbull barrel is garbage. I got duped into one years ago, and it was good for about 3 shoots till the coating started to wear out and it would sling BB's all over the place. One thing you should check on the ZCI is the window. They can sometimes have a burr on the inside. If you have...
  15. I

    Which Mosfet for my upgraded F2000 (Cyma, v3 gearbox)?

    Didn't I go off on a mad rant about Titan batteries a bit ago, I'm going to like one of your posts in it rather than drag it all back up :D For the FET. Personally I like them to be as cheap as possible, I typically use the Xcortech XET304U or similar (Acemos). Simply because there dumb...
  16. I

    IMAX B6AC V2 Charger Broken Trace

    Yup I meant flux... Getting carried away there. I do tend to edit a few times after posting as I'm good at making small mistakes like that! That flux is a hard brittle tree sap. It's melted into the tin and you can usually just crack it into fragments at the edges for making the liquid...
  17. I

    IMAX B6AC V2 Charger Broken Trace

    I wouldn't bother with paste flux (solder mistake picked up on below). It's fine for some applications, but for electronics where you want to put the solder where it's needed without excess the liquid types are easier to use. Like I say make your own it's very cheap. One of those tins has enough...
  18. I

    IMAX B6AC V2 Charger Broken Trace

    It's not just the tools, it's the whole system. I picked up a load of ex MOD gear a few years ago dirt cheap, Among it was a lovely roll of the really thick masking grade 3m kapton tape, and a few full rolls of Omega 63/37 with fast flow flux 2% flux. It blew my mind just how much better...
  19. I

    IMAX B6AC V2 Charger Broken Trace

    I saw that one a long time ago, It's interesting don't you think that a man with all that testing gear doesn't come out and say anything about how dangerous they are. There's a good reason for that, The circuit used in this design of charger can't be patented, Only the enclosure and branding can...
  20. I

    IMAX B6AC V2 Charger Broken Trace

    lol big clives already done it.  
Back
Top