• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

Search results

  1. steverebo

    Help with my arp9 project build

    When I shoot the nozzle stays retracted like it is precocking 
  2. steverebo

    Help with my arp9 project build

    I have an arp9 that is my project gun that I bought with a dead mofset I have replaced the trigger and mofset with a perun v2 hybrid added some 13:1 gears that are short stroked by 3 teeth a new compression set and thrust bearing spring guide, 155mm prometheus barrel and I've stuck with the...
  3. steverebo

    What spring will get an ARP9 to 330fps?

    Compression sorted 155mm barrel and 60% cylinder plus I short stroked the stock gears by 2 to prevent any pme and with the stock spring I am now hitting 328fps in .025g bb's So going by the information on here that the stock spring is m120 so would an m110 or m105 get me down to 295 or just...
  4. steverebo

    What spring will get an ARP9 to 330fps?

    How long did you go? I'm looking at 141mm 6.01 lambda on3 barrels and 155mm 6.03 prometheus. 155mm is the max I could use and still keep my tracer unit on the front 
  5. steverebo

    What spring will get an ARP9 to 330fps?

    So I've bought an arp9 boneyard as the mofset was dead so I've replaced that and it's working perfectly except some obvious compression issues.  I'm going to reshim it replace the piston, piston head and nozzle and stick with the stock gears as this is going to be my cqc gun and it seems to be...
  6. steverebo

    ARP9 two tone @ defcon airsoft?

    I did try to call them today quiet a few times but no luck and emailed. Thought I would try my luck here as the stock of the blue super Ranger kit is low 
  7. steverebo

    ARP9 two tone @ defcon airsoft?

    I wanted to know if anyone has ordered an arp9 in two tone from defcon airsoft as I wanted to know if its just the rail and stock that are painted as I was going to order the super Ranger accessory kit to match
  8. steverebo

    JG MP5A3 SWAT any good?

    Cheers, the price of my local retailer is £175 so a lot more than £100. In the description it stated metal and polymer mix I think it's a metal upper polymer lower.  Was going to grab one for some cqb as my m4 is too bulky and chrono's well over the Epsom tunnels 330 limit
  9. steverebo

    JG MP5A3 SWAT any good?

    So I'm now looking to buy myself a second gun aimed more towards cqb and I've seen the JG MP5A3 SWAT and wondered if anyone owns or has had a play with one as I cannot find any reviews anywhere and I'm after an honest option of build quality and reliability ect
  10. steverebo

    Nozzle and hop unit wear after one game

    Will I need to replace the nozzle
  11. steverebo

    Nozzle and hop unit wear after one game

    So took my newly fixed gun for a game and it was great it shot perfectly try other than after 40 or 50 meters it would curve left but my mates stock gun dis something similar so thought nothing of it. Just took it apart to thoroughly clean the barrel and found this on my nozzle only on the top...
  12. steverebo

    Cylinder size

    Ive done some measurents and calculations and I think I'm fine my current cylinder to barrel volume ration is 1.92:1 
  13. steverebo

    Cylinder size

    Yes all scratched like something had scraped across the bottom
  14. steverebo

    Cylinder size

    I did and some air seal issues so replaced the plastic set with aluminium including an xt cylinder the gun now fires flawlessly my feeding issues are gone it's perfect with fps variances no more than around 5fps. I did notice that my stock broken cylinder only had the port on one side but the...
  15. steverebo

    Cylinder size

    GI'm a bit confused around cylinder sizes, my rifle has a 290mm inner barrel so using the guide on the store page I purchased a 60% cylinder and installed it (old one died) now I've found out the stock one was a 75%. Bearing in mind my stock barrel length was only 270mm was my rifle over volume...
  16. steverebo

    Is precocking bad for your aeg gearbox?

    Perfect cheers guys that's exactly what I wanted to hear
  17. steverebo

    Is precocking bad for your aeg gearbox?

    So my gun is back up and running perfectly with no feeding issues or anything so in the interest in preserving the gearbox as much as possible I wanted to know if precocking is bad for the gearbox?
  18. steverebo

    How do I prevent or mitigate gearbox cracking in the future?

    Cheers buddy, I think my plan is to gwt this up and running and then grab a new gun ASAP and as you said keep this spare.  Wish I had found this forum before I got my gun as you guys have been brilliant and it would have saved me a lot of hassle, money and stress
  19. steverebo

    How do I prevent or mitigate gearbox cracking in the future?

    It was all stock bar the gears and mofset till this happened as the stock compression set was fine and had no issues but it all got totalled when the gearbox cracked. I tried to get a slot with luke from negative airsoft to fix it but he has a backlog of 3 months so I'm trying myself and hoping...
  20. steverebo

    How do I prevent or mitigate gearbox cracking in the future?

    3 games 0900 to 1600 so I'm hoping that was just a lemon and the one I'm receiving will hold out longer. I have purchased the lonex pom mushroom head silent piston and rocket silent cylinder head which I am hoping help reduce some of the shock.  I'm going to grab a retro arms hop u it as it is...
Back
Top