• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

Search results

  1. steverebo

    Please help me with my warhead motor

    So I've finally fixed all my issues I short stroked by one tooth which to be fair I needed as I was over for my cqb sight and use the custom tappet plate and spring I now get perfect 294 to 297 on semi and 290 to 295 on full auto which is close enough I use 3 round burst anyway and that stays at...
  2. steverebo

    Please help me with my warhead motor

    Ok one modified tappet plate I removed a small amount at the top so it picks up a bit later and removed some from the bottom so it goes back faster should I take a bit more from the bottom or do you think that's enough
  3. steverebo

    Please help me with my warhead motor

    Is it safe to take 4 coils from tappet spring?
  4. steverebo

    Please help me with my warhead motor

    Mine is very similar in shape a bit bigger but I have the extended side in the right as well 
  5. steverebo

    Please help me with my warhead motor

    Would my shs delayer chip have any effect on this?
  6. steverebo

    Please help me with my warhead motor

    But all my batteries are 11.1v 30c :( There must be another way
  7. steverebo

    Please help me with my warhead motor

    FIXED IT!!!!!!!! so my stupid titan's battery protection and overdischarge protection was not playing nice with my warhead (i was unaware but warhead motors have thier own battery protection) so now with active breaking at 100% my nozzle remains in the released position after every shot meaning...
  8. steverebo

    Please help me with my warhead motor

    Ok the plot thickens, I put the warhead in my m4 with its 18:1 gears and perun mofset and found it was perfect so I looked at my mofset realised my preun had some quiet heavy active breaking on. I put the warhead back in my arp9 and tur Ed on 100% active breaking and bingo my fos was bang on but...
  9. steverebo

    Please help me with my warhead motor

    Nope no signs of pre engagement I initially tried this with the same gears but short stroked by 3 teeth and my first thought was ot didn't like the short stroking so I grabbed a new set of gears and just changed out the sector gear issue still persists. I do have a delayer chip installed I have...
  10. steverebo

    Please help me with my warhead motor

    Ok I'm at my wits end after lots of trial and error I have worked out that my warhead base 27k motor is the cause of all my pain. When I install the warhead motor in my gun the fps is all over the place with lows of 280 and highs of 330 on .25 but when I put my old ifrit motor in my fps is...
  11. steverebo

    Less is more, thus shaved is more than bushed.. Warhead brushless question

    I might try and cut a few mm from my tappet and see if that helps my arp9, I have had someone suggest to me trying a dsg tappet plate with my ssg gears due to the fast cycle time so I may even try that
  12. steverebo

    Less is more, thus shaved is more than bushed.. Warhead brushless question

    You have just completely described the issue I am having with my arp9 since upgrading to my warhead base 27k my fps has dropped by around 40fps I tried sanding down my delayer chip no luck it's been driving me mad  
  13. steverebo

    Gate titan with warhead motor help

    Just an update, I turned off active breaking turned on precocking set it tk manual on ots pre set lowest setting and now my nozzle rests perfectly in the forward position. I'm sure its the delayer chip causing it just glad I worked it out cheers guys hopefully this assists someone else 
  14. steverebo

    Gate titan with warhead motor help

    Yep the cycle completes and leaves the piston in exactly the same position. I think it might be the delayer chip contributing to this as I think it stops the gear in what it believes to be the perfect position but the delayer chip is still preventing the tappet plate from moving forward it...
  15. steverebo

    Gate titan with warhead motor help

    That's perfect cheers bud i will have a play whe  i get home, I recon a small amount of precock and no AB will allow the nozzle to rest properly. I don't mind the free precock but I want to ensure my gun  lasts as long as possible
  16. steverebo

    Gate titan with warhead motor help

    Nah its an arp9 so the short barrel means means I'm running an M125 spring so rps isn't that wankerish as all and it's my CQB gun so it tends to stay on semi and I just wanted instant trigger response which this give me. According to my gate titan my trigger response is 56ms  Really on there...
  17. steverebo

    Gate titan with warhead motor help

    So my build is: ARP9 13:1 zci gears short stroked 3 teeth + shs delayer chip  New compression  set stock nozzle  Gate titan advanced  Warhead base 27k  11.1v 30c lipo I'm having an issue where the nozzle is always in the precocking position no matter what percentage active breaking I use...
  18. steverebo

    G&G CM16 SRXL suitable for a DMR

    Ive already replaced the piston head with a gearparts pom, piston with a zci cnc 14 tooth one, cylinder head with an fps softair one. These were all parts i had left from previous builds that got chnaged. I also ordered a new zci 363mm barrel because the aluminium one it came with was appalling 
  19. steverebo

    G&G CM16 SRXL suitable for a DMR

    So I managed to grab a CM16 SRXL from used airsoft for £80 boxed like new but was only shooting 210fps. I fixed this instantly by replacing the old style hop unit with a zci rotary and a new spring. Now this is my 4th rif and I have decided that this could be my DMR build but I wanted to know...
  20. steverebo

    What's the ARP9 stock nozzle length

    As stated above I'm after the length of the stock arp9 nozzle
Back
Top