• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

Search results

  1. steverebo

    Spring calculation

    I would like to work out what spring is in an Aeg I have just bought. Its an arp9 but has had a 200mm barrel fitted and 12:1 gears but no short stroking and shoots at around 305fps with .25 bb's
  2. steverebo

    How much fps would I lose dropping my barrel length from 200mm to 128mm

    I have had a play for a few games and it is very nice but I really dislike the huge suppressor and quiet like the stock look of the arp9. Perhaps I could but a pdw rail and short barrel extention and do it that way
  3. steverebo

    How much fps would I lose dropping my barrel length from 200mm to 128mm

    This for an arp9 I bought that the original owner put a 200mm inner barrel and suppressor covering it and was thinking about going back to stock length 
  4. steverebo

    How much fps would I lose dropping my barrel length from 200mm to 128mm

    I didn't think barrel length effected accuracy in airsoft?
  5. steverebo

    How much fps would I lose dropping my barrel length from 200mm to 128mm

    So I'm thinking of reducing the length of my barrel to create a nice cqb size gun and was wondering how much fos I would drop going from 200mm to 128mm I'm currently shooting at 305fps with a .25
  6. steverebo

    Specna H12 buffer tube and stock replacement

    So my specna H12 has a slightly different stock tube it appears the retention part that holds the stock in as you extend and retract is deeper set that my other aeg and the sling plate has a bigger opening and the buffer tube actually passes through it instead of sitting on top. I want to...
  7. steverebo

    How many fps would you gain by increasing barrel length by 4cm

    Yeah I know 280 is pretty reasonable so I'm not overly worried but I have a cqb gun that is bang on 290 on .25 and this gun is my outdoors gun so if I can cheaply get it closer to the 1.14 mark then why not. I have one of those small pottable rechargeable chrono's which I take to all my games...
  8. steverebo

    How many fps would you gain by increasing barrel length by 4cm

    I cannot remember the spring but its shooting 280fps with .28 bb's on average with a variance of around 5fps  I would like to get it up to around 290 without having to mess with my spring as it's a right pain getting to it
  9. steverebo

    How many fps would you gain by increasing barrel length by 4cm

    Cheers guys purely from reading all the comments I'm going to grab the 340mm even if I don't end up sticking with it as they are only cheap and see if I gain anything or nothing and feed back my results. I did skimp on the details it's an 416d with 3/4 cylinder short stroked by 4 teeth (2...
  10. steverebo

    How many fps would you gain by increasing barrel length by 4cm

    As stated above I want to increase my fps a bit I'm using a 300mm zci 6.02 barrel how much fps would I gain by increasing the barrel length to 340mm?
  11. steverebo

    Lion vs lipo which battery should I buy

    What is the performance like between the 2, I normally rock an 11.1v 30c so would the 11.1v 3000mah lion perform the same?
  12. steverebo

    Lion vs lipo which battery should I buy

    Yeah I saw that video I wasn't looking at the over priced titan's I have seen a few other companies like valken who have some 3000mah 11.1v lions for about £25/£30 my current 11.1v 1450 30c lipo's were £25. I'm just liking the idea of 3000mah capacity but wanted to know if they perform as good...
  13. steverebo

    Lion vs lipo which battery should I buy

    So my new gun has arrived and I want to buy a new battery for it with higher capacity. My current batteries are nuprol 1450mah 11.1v 30c lipos I was potentially looking at a 3000mah 11.1v lion  How do these nlcompare to each other in regards to power and performance 
  14. steverebo

    White buildup in barrel after only 400 rounds

    I'm using the g&g drum magazine. I used some good old brass and drill and then thoroughly cleaned it out with isopropyl alcohol 
  15. steverebo

    White buildup in barrel after only 400 rounds

    It's the stock g&g plastic hop and stock plastic nozzle, I will check for any burrs when I get home but surely that would effect the trajectory of the bb and once the barrel is clean it is laser sharp accurate. I have used vorsk .25 blaster devil .25 and some .25 tracer rounds all have had...
  16. steverebo

    White buildup in barrel after only 400 rounds

    Yep thoroughly with isopropyl alcohol I've also polished the inner barrel 
  17. steverebo

    White buildup in barrel after only 400 rounds

    Here is a picture and this is after around 500 rounds
  18. steverebo

    White buildup in barrel after only 400 rounds

    So my gun shoots like a laser but after skirmishing it this evening I had massive accuracy issues after the first 90 minute game and looking my barrel it was full of a white residue I managed to removed it all with the unjamming end of my cleaning rid and my accuracy went back to laser perfect...
Back
Top