-
Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.
The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here
If you have any issues please post about them in the Forum Feedback thread: Go Here
Search results
-
A
THE TM MWS thread
I’ll do it like that then. I tend to move between my MWS and MTW but 80% of the time, I’m using my MWS. I was also wondering why my Odin vomits out 8-10 bbs once done filling an aeg mag, I guess its probably because the tension is too high and it’s prematurely loading bbs into/through the... -
A
THE TM MWS thread
Very good to hear, I've ordered one of them myself! I used this weird 3D printed crank loader from Italy before but it's finally kicked the bucket, I'm surprised it even lasted a year. How do you increase tension on the odin? edit: I realised I shouldn't be lazy and I googled it myself, I feel... -
A
THE TM MWS thread
Eyyy this channels is really great! I found them a few months ago but forgot the name and couldn't find them again, so it's cool to see they have an MWS video. -
A
THE TM MWS thread
I’d be interested in seeing some proper testing of if there is any improvement over the stock arm and this when using, for example, an omega nub and ML bucking. -
A
THE TM MWS thread
I took apart and cleaned my trigger box which was completely filthy to try and improve the feel of the trigger. When I put it back together, I noticed the trigger reset has become significantly weaker, to the point where I can sometimes get the trigger to fail to reset when firing in semi by... -
A
Tm/We Glock Nozzles
I'm looking at doing this same thing now, since I got an A1A RMR cut slide (lallo-P from JKArmy) which comes with their bbu and nozzle setup. I noticed that something is off spec as I can see the piston head through the gas port of the nozzle by around 1mm. I tested the slide with HPA and it was... -
A
THE TM MWS thread
Ive had huge issues in the past getting the damn pin out of the metal side of the nozzle spring, I destroyed my stock nozzle spring doing it. The time I did manage to get it out, I set the metal part onto polystyrene that was inside my MTW box, then hammered that shit with a screwdriver with an... -
A
THE TM MWS thread
Just spotted this! https://www.wgcshop.com/collections/new-arrivals/products/omg-lt-style-folding-stock-adaptor-for-ar-platform-gbbr?fbclid=IwAR0eO8Bs6LuNaq0ETKu1Rpwk4snKlH6P_fGifoz1BtZhkhXCEU8QWK9xkX4 Any thoughts? -
A
THE TM MWS thread
I fit my Acetech Lighter S into the Angrygun Socom556 suppressor, by removing the metal tube that comes in the suppressor, creating a tight fitting cardboard+electrical tape cylinder to surround the tracer and make it tight against the suppressor internals, then putting the tracer into the... -
A
THE TM MWS thread
When I first got my MWS, I had an Edgi 6.03 in it. From what I understand, Edgi barrels are some of the best you can get. I used it for a while with this inner barrel, but eventually wanted to run a shorter outer barrel and the Edgi was too long (stuck out of the end of the outer barrel), so I... -
A
THE TM MWS thread
Thank God for that. I'm definitely buying 3 or 4 of them then. Fingers crossed GunsModify don't flub it and actually come out with something that can compete with the standard MWS mags. -
A
THE TM MWS thread
I'm well excited for this! Will pick up two or three if they're in the same price range as the SAA mags, although I'm not sure how likely that is... -
A
THE TM MWS thread
I've also heard that if you're getting failed bolt lock and there's no visible wear on the bolt catch mechanism, then try backing out the buffer tube half a turn or a full turn. This gives the bolt that tiny extra bit of travel needed to reliably lock back! -
A
THE TM MWS thread
But you're still missing outer barrel, hop chamber, dust cover etc. Also I've see Angrygun have a new gen 2 of their MK16 (which honestly looked horrific before) and it seems promising! Edit: now I think about it, taxes would kind of suck... I think international shipping is free with orders... -
A
THE TM MWS thread
Just found this today: https://www.airsoft-outfitters.com/products/aofc-urgi-mk16-14-5-upper-receiver-set-for-marui-mws-gbb Seems like a pretty good ideal considering it's an entire upper, although it doesn't come with a bolt. Definitely not sure on this Unicorn inner barrel but not like it's... -
A
THE TM MWS thread
I second the HAO MK16 rail. It slides over the barrel nut with ridiculous precision and once locked in place, has 0 wobble in any direction. I can’t say the same for my MTW lower and upper though. I personally use the Angrygun 8” MCMR however I’m not entirely happy with it as it has some... -
A
THE TM MWS thread
Angrygun are really consistently pointing these days! Although my stock charging handle broke and I picked up an ambi charging handle from them and it was drop in fit, works perfectly with no issues. If only it were the same for their bolts and nozzles. It seemed promising when they posted the... -
A
THE TM MWS thread
Ohohoh I saw a video on YouTube of a guy using that tracer on his MWS, it looked so awesome... I’m tempted to pick one up next time I order from an Asian store! Let us know how it looks! Or better yet, show us -
A
THE TM MWS thread
I've run ASG .25 tracer bbs in my MWS with no issues at all. I've also used their 0.3 (or might be 0.32, I can't remember) open blasters (biodegradable ones) and had no issues at all. I got my sexiest hit on someone in fact using their open blasters in my MWS. -
A
THE TM MWS thread
I’ve got one of these coming, though the box has an incorrectly spelt name on it so I wasn’t allowed to pick it up from the service point... now I have to wait until 8th Feb for it to be returned to sender and have the label amended then sent BACK to me again ?? I’m pretty sure that ATRG guy...